WLCA27TS Omron, WLCA27TS Datasheet - Page 26

• Manufacturer Part Number: WLCA27TS
• Description: SWITCH
• Manufacturer: Omron

Specifications of WLCA27TS

• Rohs Compliant: YES
• Actuator Style: Roller Lever
• Operating Force Max: 10.2N
• Contact Voltage Ac Max: 125V
• Contact Voltage Dc Max: 8V
• Contact Current Ac Max: 10A
• Contact Current Dc Max: 10A
• Switch Terminals: Screw

* By changing the direction of the operational plunger, any one of the three operational directions (both sides, left, or right) can be selected.
Long-life Switches: WLMGCA2-LD
Head
Shaft Section Seal
Bearing
Built-in Switch
Release Plunger
O-ring
Standard Model
Long-life Model
Hardening method changed for greater
abrasion resistance.
The Head can be mounted in any of the
four directions by removing the screws
at the four corners of the Head.
By fitting a double seal consisting of an
oil seal and an X-ring to the rotary
shaft, even greater sealing properties
are achieved.
Smoother Movement
A grease holder is provided on the
shaft to prevent the grease from
running out.
Smooth movement is achieved using
olefin grease. (Standard models use
molybdenum disulfide grease.)
The bearing smooths the plunger
movement.
Built-in switch with SPST-NO+NC
contact form.
Standard Model
Standard Model
Sintered
alloy
Grease holder
Oil seal
Long-life Model
Hardening
Long-life Model
Stainless
steel +
X-ring
Head
Mounting
Screws
Conduit Opening
In addition to level screws which use G½
tube, direct-wired and pre-wired connectors
have been added to the Series.
Set Position Marker Plate
Actuator
Lever
Roller
The roller is made of self-lubricating stainless
sintered and boasts high resistance to wear.
The lever forged of anti-corrosive aluminium
alloy features high corrosion resistance and
outstanding ruggedness. With roller lever
models, the actuator position can be set
anywhere within 360°. (The lever cannot be
mounted in the opposite direction.)
The set position is easy to view.
The stroke is indicated in fluorescent color that
is visible from the slit in the rubber cap.
Standard Model
Requires maintenance (excessive overtravel)
Requires maintenance (insufficient overtravel)
Requires maintenance (excessive overtravel)
Proper range
Proper range
Cover Seal
Cover
Separator
Cover Mounting Screw
Operational Plunger *
Terminal Screws
By using a packing seal as the
cover seal, an optimum squeeze
can be obtained and high sealing
properties are assured as well.
The separator has outstanding
insulation properties and prevents
the generation of any gases
which may corrode the internal
parts.
Phillips screws are used to
ensure ease of use.
Four, M4 screws
Fluorescent paint
Long-life Model
WL/WLM
26