C200HBAT09 Omron, C200HBAT09 Datasheet - Page 166

• Manufacturer Part Number: C200HBAT09
• Description: C200H REPLACEMENT BATTERY
• Manufacturer: Omron

Specifications of C200HBAT09

• Rohs Compliant: NO
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No

Programming with Windows 95 HyperTerminal
HyperTerminal Startup
• Start up HyperTerminal via Start/Programs/Accessories .
• After starting up HyperTerminal, make the settings shown below.
• Default settings can be used for all the other settings.
• These settings do not have to be repeated each time you use HyperTerminal. Simply select the icon with the
• If the modem settings have already been made for the computer you are using, only the settings from Con-
Confirming Connection
Key in Ctrl + X at the computer. The following message will be displayed indicating that connection is com-
plete.
Operation
Creating Programs
Programs are created using text editors, such as Notepad, and are saved as text.
Transferring Programs from the Computer
152
required name.
nection Description onwards are required.
C200H-ASC02 (CF-BASIC) V1.6 1994. 12. 28
(C) Copyright OMRON Corporation 1990
READY
Location Information
Area code: Enter the area code and select OK .
HyperTerminal
A message prompting you to install a modem will be dis-
played. Select No .
Connection Description
Name: Enter the desired name and select OK .
Connect To
Connect using: Select COM1 and OK .
COM1 Properties
Bits per second: Set to 9,600.
Data bits: Set to 8.
Parity: Set to “None”.
Stop bits: Set to 2.
Flow control: Set to “None”.
Select OK .
Line Delay
In File/Properties/Settings/ASCII Setup ..., set the Line
delay to 300.
Select OK .
1, 2, 3... 1.
2.
Delete the program currently in the ASCII Unit memory using the NEW
command.
Transfer the program saved by selecting Send Text File... from the
Transfer menu as shown below.
Appendix H