DS00161 Microchip Technology, DS00161 Datasheet - Page 55

• Manufacturer Part Number: DS00161
• Description: Technical Library CD-ROM
• Manufacturer: Microchip Technology

Specifications of DS00161

• Tool Type: Manuals
• Lead Free Status / RoHS Status: na

4.7
 2000 Microchip Technology Inc.
Program Memory in the ICEPIC In-Circuit
Emulator
4.7.1
4.6.1.6
Tests the target processor for various functions. Before testing, make sure the
system is not connected to the target application, since this test modifies
various I/O pins and special function registers.
4.6.1.7
The installation program sets the command line parameters for the
diagnostics program during installation. However, if the ICEPIC In-Circuit
Emulator is reconnected to a different COM port, the following parameters
must be set:
For example: If the ICEPIC In-Circuit Emulator is connected to COM2 and you
wish to test it at 9600 baud, then the correct command line is:
icediags.exe -c2 -b9600
The ICEPIC In-Circuit Emulator emulates program memory as described
below.
PIC16C5X and PIC16CXXX Series
The PlC16C5X and PIC16CXXX series have no external memory capability.
(All the program memory resides on the chip.) For these families, during
development with the ICEPIC In-Circuit Emulator, all program code resides in
emulation program memory.
-C# where # is the COM port number (1, 2, 3 or 4)
-B#
where # is the desired baud rate (2400, 4800, 9600, 19200,
38400 or 57600)
Test Target Processor
Command Line Parameters
Basic Functions
DS51103B-page 49