C200HW-BC101-V1 Omron, C200HW-BC101-V1 Datasheet - Page 97

• Manufacturer Part Number: C200HW-BC101-V1
• Description: BACKPLANE, 10 SLOT, CPU
• Manufacturer: Omron

Specifications of C200HW-BC101-V1

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Checking Initial Operation
4-2
82
Checking Initial Operation
1, 2, 3...
After the Programming Console has been connected, it can be used to check
initial C200HX/C200HG/C200HE operation. Make sure that the Programming
Console is properly connected and that the correct power supply is being pro-
vided, and then follow the procedure outlined below.
1. Check to be sure that the Programming Console is in PROGRAM mode.
2. Turn on the power to the PC and check the CPU Unit indicators. The green
3. Check the Programming Console display and input the password (Clear
4. After checking PC operation, turn off the power. If operation is not normal,
POWER indicator should light.
and then Monitor Keys). If operation is normal, the display should appear as
shown below.
Note If the mode is not indicated, turn off and restart the power supply.
refer to 5-1 Troubleshooting.
Indicates the mode set by the mode selector switch.
RUN
MONITOR
PROGRAM
Section 4-2