UCQ-3.3/35-D24P-C Murata Power Solutions Inc, UCQ-3.3/35-D24P-C Datasheet - Page 12

• Manufacturer Part Number: UCQ-3.3/35-D24P-C
• Description: DC/DC Converter
• Manufacturer: Murata Power Solutions Inc
• Series: UCQr

Specifications of UCQ-3.3/35-D24P-C

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 18V To 36V
• Power Rating: 115.5W
• Output Voltage: 3.3V
• Output Current: 35A
• Approval Bodies: UL, CSA
• Supply Voltage: 36VDC
• Product: Isolated
• Output Power: 116 W
• Input Voltage Range: 18 V to 36 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 3.3 V
• Output Current (channel 1): 35 A
• Isolation Voltage: 2.25 KV
• Package / Case Size: Quarter Brick
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

tible to noise pickup when connected to long conductors in noisy environments.
In such cases, a 0.22µF capacitor between trim and –V
reduce this long lead effect.
On/Off Control
The input-side, remote On/Off Control function (pin 2) can be ordered to operate
with either polarity:
are enabled when pin 2 is left open (or is pulled high, applying +3.5V to +13.5V
with respect to –Input, pin 1) as per Figure 8. Positive-polarity devices are
disabled when pin 2 is pulled low (0 to 0.8V with respect to –Input).
is left open (or pulled high, applying +3.5V to +13.5V), and on when pin 2 is
pulled low (0 to 1V) with respect to –Input as shown in Figure 9.
mechanical relay or an open-collector/open-drain drive circuit (optically isolated
if appropriate). The drive circuit should be able to sink appropriate current (see
Performance Specifications) when activated and withstand appropriate voltage
when deactivated. Applying an external voltage to pin 2 when no input power is
applied to the converter can cause permanent damage to the converter.
The Trim pin (pin 6) is a relatively high impedance node that can be suscep-
Positive (no suffix): standard models are equipped with Positive-polarity and
Negative (“N” suffix): Optional Negative-polarity devices are off when pin 2
Dynamic control of the remote on/off function is best accomplished with a
Figure 8. Driving the Negative Polarity On/Off Control Pin
Figure 9. Driving the Negative Polarity On/Off Control Pin
www.murata-ps.com
out
can be added to
Single Output UCQ Models
Typical Performance Curves
Technical enquiries email: [e-mail], tel:
Low-Profile, Quarter Brick, 8.3-40 Amp
Isolated DC/DC Converters
MDC_UCQ Models.B06 Page 12 of 16
[phone]