72-8355 TENMA, 72-8355 Datasheet - Page 9

• Manufacturer Part Number: 72-8355
• Description: POWER SUPPLY, SWITCH MODE, 16V
• Manufacturer: TENMA

Specifications of 72-8355

• Power Supply Output Type: Variable
• No. Of Outputs: 1
• Output Voltage: 16V
• Output Current: 5A
• Power Rating: 80W
• Input Voltage: 90V AC To 264V AC
• Length: 330.2mm
• Width: 50.8mm
• Height: 127mm
• Weight: 4.2lb

8. Remote Sensing Operation
In situations where the load current is very high, or when there is a long distance of cable between
the output of the supply and the load, a voltage drop can occur. This can create problems in
applications where precise voltage levels are critical. For this situation, RS+ / RS– terminals (19)
are provided on the rear panel for remote sense connection.
Connection and operation
Important Note:
•
•
•
•
•
•
•
Ensure that the front panel OUTPUT selector (9) is OFF.
Connect the load to either the front OUTPUT (2) or rear O/P alternative output (19)
connections
Using separate leads, connect the RS terminals (19) to the load as well, be careful not to
reverse polarity.
If desired, utilize the REVIEW (7) function to verify proper voltage and current settings.
Switch the OUTPUT selector (9) ON.
Be extremely careful not to reverse the polarity between the main output and remote
sensing terminals.
Do not leave the load connected to the remote sensing terminals when not connected to
the supply output. If the load must be disconnected while the supply is on, remove the
remote sensing connections first.
9