LGB00100 Red Lion Controls, LGB00100 Datasheet - Page 3

• Manufacturer Part Number: LGB00100
• Description: Four Preset Batch, W/Red Bkltng
• Manufacturer: Red Lion Controls
• Type: Counterr

Specifications of LGB00100

• Accuracy: ±0.01% %
• Cut Out, Panel: 2.68×2.68 "
• Dimensions: 5.87"L×2.95"W×2.95"H
• Display Digit Height: 0.3 "
• Display Type: LCD
• Function: Counter
• Material, Casing: Plastic
• Number Of Digits: 2×8
• Primary Type: Electronic
• Range, Measurement: -99999 to 999999
• Termination: Plug-In Terminal
• Voltage, Supply: 115/230 VAC, +12 VDC
• Sealing: NEMA 4X/IP65
• Power Requirements: 115/230 VAC, 12 VDC
• Operating Temperature: 0°C to 50°C
• Panel Cutout: 2.68" × 2.68"
• Lead Free Status / Rohs Status: RoHS Compliant part

SPECIFICATIONS (Cont’d)
Note:
13. ENVIRONMENTAL CONDITIONS:
14. CONSTRUCTION: High impact plastic case with clear viewing window.
15. WEIGHT: 1.5 lbs. (0.68 Kg)
PROGRAMMING
interface. The English prompts, the front panel keypad, and the flashing display
aids the operator during programming. In the normal run mode, the main
display loop allows the user to scroll through the four programmable indication
displays, using the direction keys. From the main loop, presets and scale factors
can be accessed directly for changing parameters. All other parameters are
accessed through the programming loop. In the programming loop, parameters
can be viewed or changed and the operator can exit anywhere in the loop.
Shown to the side is part of the main display loop and part of the programming
loop of a Dual Preset Legend (LGD) unit. Also shown are four different views
of the indication displays.
PROGRAMMABLE FUNCTIONS
PRESET(S)
SCALE FACTORS (RATE & COUNT)
COUNT SCALE MULTIPLIER
totalizer by a factor of 1, 0.1, 0.01 or 0.001 to view the desired number of
significant digits on the 6-digit Counter display or the 8-digit Totalizer display.
DECIMAL POINT
RATE SCALE MULTIPLIERS
by a factor of 0.01, 0.1, 1, 10, 100, or 1000 to view the desired number of
1. When the unit is DC powered from terminal TBA pin 5 (common) and
Refer to the EMC Installation Guidelines section of the manual for additional
Operating Temperature: 0 to 50°C
Storage Temperature: -40 to 70°C
Operating and Storage Humidity: 85% max. (non-condensing) from 0°C
Vibration According to IEC 68-2-6: 5 to 150 Hz, in X, Y, Z direction for
Shock According to IEC 68-2-27: Operational 20 g’s (10g relay), 11 msec
Altitude: Up to 2000 meters
The front panel meets NEMA 4X/IP65 requirements for indoor use when
installed properly. Installation Category II, Pollution Degree 2. Panel gasket
and mounting clips included.
The Legend Series provides an easy to use, menu driven programming
Ranges from -99999 to 999999
Counter Load ranges from -99999 to 999999
Range from 0.0001 to 5.9999
Multiplies the contents of the 9-digit internal counter or the 11-digit internal
Separate decimal point location for Count and Rate displays.
Multiplies the contents of the actual internal rate, pulses per second (PPS),
terminal TBA pin 3 (DC OUT/IN) a power line filter was installed, RLC
#LFIL0000 or equivalent, so as not to impair the function of the unit.
information.
to 50°C.
1.5 hours, 2 g’s.
in 3 directions.
0.00000
0.0000
0.000
0.00
0.0
0
significant digits on the 6-digit Rate display. The desired time units that the rate
is to be displayed, can also be programmed as per Second (x1), per Minute
(x60), or per Hour (x3600).
UPDATE TIME
which provides averaging capability for non-consistent pulse spacing.
COUNTING MODES
RESET MODES
The Rate Minimum/Maximum Update Times range from 0.1 to 99.9 seconds
Count with Direction
Count with Direction (X2)
Quadrature
Quadrature (X2)
Quadrature (X4)
2-Input Anti-coincidence Add/Add
2-Input Anti-coincidence Add/Subtract
A separate Inhibit input, is available for all count modes.
Manual Reset
Automatic Reset at Preset
Reset at Beginning Of Output 1
Reset at End Of Timed Output 1
Reset at Beginning Of Output 2
Reset at End Of Timed Output 2
Reset at Beginning Of Output 1 or Output 2
Reset at End Of Timed Output 1 or Output 2
MODEL LGB ONLY
Reset at Beginning Of Output 3
Reset at End Of Timed Output 3
Reset at Beginning Of Output 4
Reset at End Of Timed Output 4
Reset at Beginning Of Output 3 or Output 4
Reset at End Of Timed Output 3 or Output 4