01230.9-01 STEGO, 01230.9-01 Datasheet - Page 27

• Manufacturer Part Number: 01230.9-01
• Description: Humidity And Temperature Control
• Manufacturer: STEGO

Specifications of 01230.9-01

• Mounting Type: DIN Rail
• Operating Voltage Max: 120V
• Operating Temperature Max: 60°C
• Output Type: Temperature
• Supply Voltage: 120VAC
• Temperature Accuracy ±: 1K
• Humidity Range: 50 To 90% RH
• Operating Temperature Min: 0°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
03051.0-00
03051.0-02
03059.9-00
03059.9-02
Part No.
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
Heating capacity
950W
950W
950W
950W
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
4.1” (105 mm)
6.6” (168 mm)
The compact CR 030 high performance fan heater prevents formation of condensation and pro-
vides an evenly distributed interior air temperature in enclosures. This fan heater is available
with an integrated thermostat for temperature control or a pre-set hygrostat for humidity con-
trol. The CR 030 was designed as a stationary unit for the bottom of the enclosure. For panel
or DIN rail mount, the CR 130 fan heater is recommended.
| |
Compact design
Built-in overheat protection
Integrated adjustable thermostat or fixed hygrostat
Double insulated plastic housing
Technical Data
Heating element
Overheat protection
Heater body
Axial fan, ball bearing
Air flow, free blowing
Connection
Housing
Mounting
Mounting position
Operating* / Storage temperature
Dimensions
Weight
Protection class
Protection type
* Operating temperature of heater with integrated hygrostat: +32 to +140°F (0 to +60°C)
Operating voltage
230VAC, 50/60Hz
230VAC, 50/60Hz
120VAC, 50/60Hz
120VAC, 50/60Hz
CR 030 Foot-mount Fan Heater 950W
N
L
none (no integrated controls)
65% RH, factory-set
Setting range
high performance cartridge
built-in temperature limiter
extruded aluminum
service life 50,000h at 77°F (25°C)
94 cfm (160m³/h)
2-pole terminal AWG 16 max. (1.5mm²) with strain relief,
clamping torque 0.8Nm max.
plastic, UL 94V-0, black
M5 screws (not included)
horizontal
-49 to +158°F (-45 to +70°C)
3.9 x 5.7 x 6.6” (100 x 145 x 168mm)
approx. 3.1 lbs. (1.4kg)
II (double insulated)
IP20
32 to 140°F
0 to 60°C
Wiring diagram
N
L
M
UL File No. E234324, VDE
UL File No. E234324, VDE
UL File No. E234324
UL File No. E234324
Approvals