SNAP-AIMV2-4 OPTO 22, SNAP-AIMV2-4 Datasheet - Page 23

• Manufacturer Part Number: SNAP-AIMV2-4
• Description: Analog I/O Module
• Manufacturer: OPTO 22

Specifications of SNAP-AIMV2-4

• Accessory Type: Analog I/O Module
• Signal Input Type: Analog
• No. Of Analog Outputs: 4
• No. Of Analog Inputs: 4
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• For Use With: SNAP I/O Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Voltage Input Module, -10 VDC to +10 VDC or -5 VDC to +5 VDC,
Two or Four Channels
Description
The SNAP-AIV and SNAP-AIV-4 modules can be
configured for either -10 VDC to +10 VDC or -5 VDC to +5
VDC operation on each channel. The SNAP-AIV provides
two channels, and the SNAP-AIV-4 four. If you need a
module with more channels, see
on
Note that all channels share a common reference
terminal. If you need two isolated channels on the same
module, see Opto22 form #1182.
SNAP-AIV (Two channels)
Four-channel module wiring is shown on
SNAP Analog Input Modules
IMPORTANT: The mounting rack connector has 24 pins;
the module connector has 20 pins. The extra pins on the
mounting rack connector prevent misalignment of the
module during installation.
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
page 3
for I/O processor compatibility.
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
page
25. See the table
page
24.
Specifications
Part Number
SNAP-AIV
SNAP-AIV-4
Input Range
Over-Range Limits
Resolution
Input Filtering
Input Response Time
(% of span/ delta V / delta t)
Data Freshness (Max)
DC Common Mode Rejection >-120 dB
AC Common Mode Rejection >-120 dB @ 60 Hz
Maximum Survivable Input
Maximum Operating Com-
mon Mode Voltage
Accuracy
Gain Temperature Coefficient 30 PPM/ °C
Offset Temperature Coeffi-
cient
Isolation
Power Requirements
Input Resistance
Ambient Temperature:
Torque, hold-down screws
Torque, connector screws
Agency Approvals
Warranty
Operating
Storage
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Description
Two-channel analog voltage input -10 to +10 VDC
Four-channel analog voltage input -10 to +10 VDC
-3 dB @ 64 Hz
220 VAC or 300 VDC
1500 V
5 VDC (±0.15) @ 170 mA
5.26 in-lb (0.6 N-m)
UL, FM, CE, RoHS, DFARS
From -10 volts to +10 volts
From -5 volts to +5 volts
From -11 to +11 volts (+/-10 V range)
From -5.5 to +5.5 volts (+/-5 V range)
0.4 mV when configured -10 to +10 volts
0.2 mV when configured -5 to +5 volts
63.2% / 6.7 V / 10 ms
11.5 ms (2-channel, +/- 10 VDC)
23 ms (2-channel, +/- 5 VDC
23 ms (4-channel, +/- 10 VDC)
46 ms (4-channel, +/- 5 VDC
250 V
0.05%, 5 mV @ 10 VDC
2.5 mV @ 5 VDC
15 PPM/ °C
1 M ohms (each channel; both channels
share the same reference point)
0 °C to 70 °C
-25 °C to 85 °C
4 in-lb (0.45 N-m)
Lifetime
PAGE
23