SNAP-AIMV2-4 OPTO 22, SNAP-AIMV2-4 Datasheet - Page 13

• Manufacturer Part Number: SNAP-AIMV2-4
• Description: Analog I/O Module
• Manufacturer: OPTO 22

Specifications of SNAP-AIMV2-4

• Accessory Type: Analog I/O Module
• Signal Input Type: Analog
• No. Of Analog Outputs: 4
• No. Of Analog Inputs: 4
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• For Use With: SNAP I/O Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Thermistor Input Module 0–40 K, 0–20 K, 0–10 K, or 0–5 K Ohm
Description
The SNAP-AIR40K-4 module provides four channels of analog
to digital conversion, ideal for thermistors used in HVAC
applications or for reading the resistance of potentiometer
input. See the table on
The default input range is 0 to 40 K Ohms. The module can
also be configured for 0 to 20 K, 0 to 10 K, or 0 to 5 K Ohms.
NOTE: Resistance probes must be isolated from each other.
SNAP-AIR40K-4
IMPORTANT: The mounting rack connector has 24 pins; the module
connector has 20 pins. The extra pins on the mounting rack
connector prevent misalignment of the module during installation.
SNAP Analog Input Modules
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
page 3
for I/O processor compatibility.
Specifications
Part Number
SNAP-AIR40K-4
Input Range
Maximum Over-Range
Resolution
Input Filtering
Data Freshness (Max)
DC Common Mode Rejec-
tion
AC Common Mode Rejec-
tion
Maximum Operating Com-
mon Mode Voltage
Accuracy
DRIFT: Gain Temperature
Coefficient
DRIFT: Offset Tempera-
ture Coefficient
Isolation
Power Requirements
Operating Temperature
Storage Temperature
Torque, hold-down screws
Torque, connector screws
Agency Approvals
Warranty
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
Description
Four-channel analog resistor/thermistor
input, 40 K ohms, 20 K ohms, 10 K ohms, or
5 K ohms
0 to 40,000 Ohms
0 to 20,000 Ohms
0 to 10,000 Ohms
0 to 5,000 Ohms
44 K (40 K Ohms range)
22 K (20 K Ohms range)
11 K (10 K Ohms range)
5.5 K (5 K Ohms range)
1.6 Ohm @ 40 K Ohms
0.8 Ohm @ 20 K Ohms
0.4 Ohm @ 10 K Ohms
0.2 Ohm @ 5 K Ohms
-3 dB @ 3.2 Hz
100 (40 K Ohms)
200 (20 K Ohms)
400 (10 K Ohms)
800 (5 K Ohms)
>-120 dB
>-120 dB @ 60 Hz
250 V
0.1% ± 40 Ohms @ 40 K Ohms
0.1% ± 20 Ohms @ 20 K Ohms
0.1% ± 10 Ohms @ 10 K Ohms
0.1% ± 5 Ohms @ 5 K Ohms
30 PPM/ °C
15 PPM/ °C
1500 V
5 VDC (±0.15 ) @ 190 mA
0 °C to 70 °C
-25 °C to 85 °C
4 in-lb (0.45 N-m)
5.26 in-lb (0.6 N-m)
UL, FM, CE, RoHS, DFARS
Lifetime
PAGE
13