G4RA OPTO 22, G4RA Datasheet - Page 3

• Manufacturer Part Number: G4RA
• Description: Controllers
• Manufacturer: OPTO 22

Specifications of G4RA

• No. Of Modules: 16
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

INSTALLATION NOTE
Form 629-040920
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Installation
Brick Diagram
1. Disasemble the brick unit and attach the brick base to the mounting surface.
2. Connect field and power wiring to the brick base. Refer to Form # 595, Mistic 200 System Installation Guide, for specific wiring
3. Install the brick rack.
4. Install the I/O modules, G4REG, and brain board to the brick rack.
5. Set the jumpers and connect a remote cable or SBTA communications adapter to the 10-pin header.
6. If this is physically the last brick on the remote I/O network, install jumpers on the “JP3 LOOPBACK” jumper group.
7. Attach the brain board cover.
© 2004 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • Email: [e-mail]
information.
Caution: Turn OFF all power before wiring to the brick.
G4A8R/G4D16R
BRICKS
REMOTE
page 3/5