NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 477

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

Data Conversion
Correcting colors
Correcting the PLC addresses (On data conversion between direct accesses)
NT31, NT31C,
NT631, NT631C with
“-V1”
NT31, NT31C,
NT631, NT631C with
“-V2”
NT21
NT11S
Convert From
NT31, NT31C,
NT631, NT631C with
“-V2”
NT31, NT31C,
NT631, NT631C with
“-V2”
NT31 with “V2”
NT11
Convert To
*1: When converting the screen data from NT30/620 series to NT31/631 se-
*2:
S Conversion from monochrome display models to color display models
S Conversion from color display models to monochrome display models
When converting the data between different direct accesses, it may be neces-
sary to change PLC addresses since corresponding PLC is changed. In this
manual, conversion between OMRON and MEMLINK is described.
S Difference
Colors (black and white) remain as they are after the conversion.
If you want to color the converted data, change or color the data as needed.
Colors are converted into black or white as shown below.
Colors for objects other than Image
Colors for Image
Change the colors as needed.
OMRON:
MEMLINK:
On conversion, check if “NT20/30/620 Compatible Mode” ([PT Configura-
ries, we recommend converting to NT31, NT31C, NT631, NT631C with
“-V2” using NT30/620 compatible mode. This requires less modification of
screen data and is easy to perform. In this case, check if the system pro-
gram installed in the PT is Ver3j. For details of how to install the system
program, refer to Appendix B System Installer Operation.
tion] – [PT Type] is selected). (In the default status, the check mark will be
ON when trying to convert screen data from the NT20S, NT30, NT30C,
NT620S, NT620C, and NT625C to the NT21, NT31, NT31C, NT631, and
NT631C with “-V2.”)
Black, blue, red, magenta: Black
Green, cyan, yellow, white: White
Black:
Blue, red, magenta, green,
cyan, yellow, white:
Not needed.
Not needed.
Not needed.
Not needed.
Various words are available such as CIO area and
Only memory link area (PT memory) can be used.
data memory area.
Available word addresses differ depending on the
PLC that is used.
Available word addresses: 0000-9999
Black
White
Modification needed
Appendix A
465