8211 COUPLING 3M, 8211 COUPLING Datasheet - Page 21

• Manufacturer Part Number: 8211 COUPLING
• Description: COUPLING F/OPTIC FC SM D-MOUNT
• Manufacturer: 3M

Specifications of 8211 COUPLING

• Convert From (adapter End): FC Simplex Receptacle
• Convert To (adapter End): FC Simplex Receptacle
• Mode: Singlemode
• Mounting Type: Panel Mount, Bulkhead
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Features: -
• Other names: 5113811913; 51138119133; 80-6107-4233-2; 80610742332; 8211 COUPLING; 8211 COUPLING FC/PC; MF8211

10.23 FC ConnectorÑInstall the
10.26 Install the shell by aligning the
11.0 Single-Mode Polishing Procedure
11.1 Perform an air polish on the
11.4 Wipe a layer of alcohol onto
fiber by gently moving the
connector in a circular motion
on the 2 micron lapping film
(pale aqua color).
the rubber pad.
boot on the connector.
chamfers in the shell with the
chamfers on the connector.
10.24 SC connectorÑAlign the
10.27 Push firmly on the shell until
11.2 Clean the polishing jig with a
11.5 Before the alcohol evaporates,
lint free cloth moistened with
isopropyl alcohol.
place the 2 micron lapping film
on the rubber pad shinny side
down. The alcohol creates a
suction on the lapping film and
helps hold it in place.
it snaps in place.
flats of the boot with the flat
sides of the connector body.
21
11.3 Clean the rubber pad with a
11.6 Clean the lapping film with a
Note: The 2 micron lapping film
10.25 Push the boot into place.
10.28 Install the dust cap on the
lint free cloth moistened with
isopropyl alcohol.
lint free cloth moistened with
isopropyl alcohol.
connector.
should be used for one
connector only.