8211 COUPLING 3M, 8211 COUPLING Datasheet - Page 16

• Manufacturer Part Number: 8211 COUPLING
• Description: COUPLING F/OPTIC FC SM D-MOUNT
• Manufacturer: 3M

Specifications of 8211 COUPLING

• Convert From (adapter End): FC Simplex Receptacle
• Convert To (adapter End): FC Simplex Receptacle
• Mode: Singlemode
• Mounting Type: Panel Mount, Bulkhead
• Lead Free Status / RoHS Status: Vendor undefined / Vendor undefined
• Features: -
• Other names: 5113811913; 51138119133; 80-6107-4233-2; 80610742332; 8211 COUPLING; 8211 COUPLING FC/PC; MF8211

8.0 FCÑInstallation on Jacketed Cable
8.1 Turn on the Hot Melt oven. The
8.4 Load the connector into the FC
8.7 Score the jacket 1
8.10 To prevent the buffered fiber
oven requires 5 minutes to
warm up.
from the end.
connector holder. Align the key
on the connector with the key
way on the connector holder.
from being pulled out, lace
the cable through your fingers.
3
Ú
16
" (30 mm)
8.2 Open the package and remove
8.5 Place the connector holder and
Note: The connector should be in
8.8 Remove the jacket from the end
8.11 Remove the buffer in small
the components.
connector into the oven.
of the cable.
the buffer remains.
pieces until
the oven for at least one
minute, but no more than
ten minutes.
9
16
Ú
16
" (14 mm) of
8.3 Each package contains a
8.6 Place the strain relief boot and
8.9 Gather the aramid yarn together
8.12 Stripping template.
connector (A), strain relief boot
(B), clear strain relief tube (C)
and black crimp ring for 3 mm
cable (D). The strain relief tube
is not used on jacketed cable.
crimp ring on the cable.
and hold them against the cable
jacket.
A
(8 mm)
5/16"
(14-16 mm)
9/16"
B
(30 mm)
13/16"
9/16" Min.
(14 mm)
C
D