BRT-THG-2-100 BANNER ENGINEERING, BRT-THG-2-100 Datasheet - Page 9
BRT-THG-2-100
Manufacturer Part Number
BRT-THG-2-100
Description
TAPE, RETRO REFLECTIVE, 50MMX2.5M
Manufacturer
BANNER ENGINEERING
Specifications of BRT-THG-2-100
Roll Length
2.5m
Tape Type
Reflective
Width
50mm
Length
2.5 m
Reflectivity Factor
0.7
Standards
CE Marked
Temperature, Operating, Maximum
60°C
For Use With
Photoelectric Sensors
Lead Free Status / Rohs Status
RoHS Exempt Product
Fiber Optic Safety Points
* These components have no electrical connection and function either as emitters or receivers, depending on their connection to the controller. This
Banner Engineering Corp. • Minneapolis, MN U.S.A. • bannerengineering.com • Tel: 763.544.3164
minimizes the required component inventory and simplifies installation.
PICO-GUARD Fiber Optic Safety Points are single-beam optical elements. They are suitable
for custom beam-spacing applications. They come in 12 mm and 30 mm, IEC IP65 barrel
configurations with integrated, cut-to-length fiber optic cable.
PICO-GUARD Fiber Optic Safety Points and Grids are designed for use in access-guarding
and perimeter-guarding applications. They are designed to detect a torso (rather than a hand
or an arm) as a person enters a hazardous area. In these applications, personnel typically
can pass through the light grid (which disables or stops the hazard), and then may continue
into the hazardous area after the hazard has been stopped.
Fiber Optic Safety Grids
The PICO-GUARD Fiber Optic Safety Grids have 2, 3, or 4
beams in an IEC IP65 aluminum enclosure. They connect
to the controller via fiber optic cable and are designed to
meet ANSI/RIA R15.06, ANSI B11 and ISO 13855 (EN 999)
standards for proper beam placement in pass-through
guarding applications.
*
*
PICO-GUARD
Optical Elements
™
Systems
51