NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 99

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

A
B
C
D
E
F
Wavelength for the trace and the End setting on the Job
tab in SETUP. If the test ran at two wavelengths, press
A
on the OTDR tab in Setup.
Magnification factors for the trace. See “Zooming the
Trace” on page 3-27.
The distance (m or ft) and the power loss (dB) between
the cursor and the measurement marker (
OTDR plot grid. You can enable or disable the grid on
the OTDR tab in SETUP.
PASS/FAIL status appears if the cursor is on an event. The
status may refer to the event or the fiber segment
before the event. If the event looks ok, press
Details from the EVENT TABLE screen or the SUMMARY
screen to see results for the segment.
Press
moving the cursor to zooming to moving the trace if
trace overlay is active (see page 3-39). The navigational
cue above the softkey labels describes the arrow keys’
current function.
to switch wavelengths. You can set the wavelengths
E
to change the arrow keys’ function from
M
).
C
View
G
H
I
J
K
L
M
N
Key for setting and clearing the measurement cursor.
See “Using the Measurement Cursor” on page 3-26.
Moves the cursor to the next event on the trace. If you
use
Event and moves the cursor to the previous event.
Displays the event table.
For dual-wavelength tests, press
wavelengths.
Event information appears if the cursor is on an event.
Otherwise, the distance to the cursor is shown.
Scale for the distance along the cabling under test.
Tip: The distance scale represents the distance along the
Measurement marker and cursor. See “Using the
Measurement Cursor” on page 3-26.
Decibel scale for the OTDR backscatter.
K
fiber, which may be different from the distance
along the cable jacket. To adjust the length
measurements to represent cable jacket length,
change the index of refraction until the measured
length matches the jacket length.
to move the cursor,
Looking at OTDR Test Results
C
Using the OTDR
changes to Previous
A
to switch
3-23
3