SME312D BANNER ENGINEERING, SME312D Datasheet - Page 10

• Manufacturer Part Number: SME312D
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SME312D

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Input: Optical
• Output Type: Transistor
• Sensing Range Max: 380mm
• Contact Current Max: 150mA
• Switch Terminals: Cable

MINI-BEAM
10
Banner offers a wide selection of high-quality retroreflective targets. See your current Banner Sensors
catalog for complete information on available models.
Sensing range will vary, according to the retroreflector’s efficiency and reflective area.
Before installling retroreflective tape, clean the mounting surface with an isopropyl alcohol wipe.
BRT-2X2
BRT-XC
10 mm
• For high-vibration applications: model BRT-3X0BM (micro-prism geometry) is recommended.
• For long-range applications: model BRT-XC reflector provides a range up to 2 m (6.5').
• For clear object detection (low-contrast applications): reflector model BRT-2X2 is recommended;
• Polarized sensors require corner-cube type retroreflective targets only; reflective tape is not
(0.4")
56 mm
(2.2")
one comes bundled with each SME312LPC(QD) sensor.
recommended.
P/N 55214 rev. E
84.5 mm
(3.3")
51 mm
30 mm
(2.0")
(1.2")
77 mm
(3.0")
• One supplied with each SME312LPC(QD) sensor
• Reflectivity Factor: 1.0
• Maximum Temperature: +50° C (120° F)
• Reflectivity Factor: 2.0
• Maximum Temperature: +50° C (120° F)
3.5 mm
(0.13")
®
51 mm
(2.0")
4.2 mm x 14.2 mm Slot (2)
(0.16" x 0.56")
Expert
77 mm
(3.0")
84.5 mm
(3.3")
™
Clear
Acrylic
Lens
8.9 mm
(0.40")
Clear
Acrylic
Lens
Series
9 mm
(0.4")
Retroreflective Targets
61 mm
(2.4")
3.5 mm
(0.14")
Accessories
BRT-3X0BM
BRT-TVHG
4.3 mm
(0.16")
40 mm
(1.6")
10 mm
(0.4")
Banner Engineering Corp. • Minneapolis, MN U.S.A.
51 mm
38 mm
20 mm
(2.0")
(1.5")
(0.8")
• Micro-prism geometry
• Reflectivity Factor: 1.2
• Maximum Temperature: +50° C (120° F)
• Reflectivity Factor: 0.8
• Maximum Temperature: +60° C (140° F)
www.bannerengineering.com • Tel: [phone]
10 mm
(0.4")
51 mm
(2.0")
Optional brackets for mounting reflective
targets are available. See the Accessories
section of your current Banner catalog or our
website at
Retroreflective tape is
available in a variety of
sizes and shapes; see your
Banner Catalog for more
information.
Not recommended for use
with clear object detection
sensors.
www.bannerengineering.com.
Clear
Acrylic
Lens
7 mm
(0.3")
3.5 mm
(0.14")
61 mm
(2.4")