SM912LV BANNER ENGINEERING, SM912LV Datasheet - Page 18

• Manufacturer Part Number: SM912LV
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SM912LV

• Output Current: 250mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensing Range Max: 9m
• Sensor Housing: Rectangular
• Switch Terminals: Cable
• Sensor Input: Optical
• Sensing Mode: Retroreflective

18
All Banner VALU-BEAM sensors are available with the "QD"
(Quick-Disconnect) option (below). A 3, 4, or 5-pin connector
Quick-Disconnect ("QD") Cable Option
VALU-BEAM Modifications and Accessories
Dimensions, "QD" Sensors
Side View, MBCC QD Cable Connector
QD cable model
Quick Disconnect Cables for VALU-BEAM
and end view
MBCC-312
MBCC-412
MBCC-512
SM2A91R, SMA912, SMA91R
912 Series sensors with
solid-state relay output
model prefixes SM2A912,
model prefix SMA91E
model prefix SM912
All AC sensors:
All DC sensors:
All emitters:
(not used)
(cables must be purchased separately)
(depending upon the VALU-BEAM model), built into the sensor's base, mates with the SJT-type
quick disconnect cable described below. Cable must be ordered separately.
The diagrams below show pin configurations for 3, 4, and 5 pin "QD" connectors, which are located
at the base of VALU-BEAM sensors having the "QD" option. Mirror-image pin numbering is used
for the connectors of the mating cables, as shown below. Male contact pins are used in the sensor
connectors. The cable connectors have female receptacles for wiring safety.
Standard VALU-BEAM sensors (non-"QD" models, which are normally supplied with an attached
6-foot long PVC-covered cable) may instead be supplied optionally with an attached 30-foot PVC-
covered cable. Thirty feet is the most readily available length, but lengths longer than 30 feet may
also be quoted.
Pin Configurations for 3-, 4-, and 5-pin "QD" Connectors
915 Series sensors with
All sensors (except emitters):
model prefix SMA91E
e/m relay output
SMW915, SMW91R
SMA915, SMA91R,
SMB915, SMB91R
model prefixes
All emitters:
(not used)
®
Sensors with "QD" Option
990 Series sensors with
built-in totalizing
SMA990, SMA91E
model prefixes
All sensors:
counters
(not used)
(not used)