750126 PILZ, 750126 Datasheet - Page 5

• Manufacturer Part Number: 750126
• Description: PNOZ S6.1 24VDC
• Manufacturer: PILZ

Specifications of 750126

• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 8A
• Contact Voltage Ac Nom: 240V
• Contact Voltage Dc Nom: 24V
• No. Of Poles: 3
• Relay Mounting: DIN Rail
• External Width: 22.5mm
• External Depth: 120mm
• Svhc: No SVHC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Two-hand relays
Up to PL e of EN ISO 13849-1
PNOZ s6.1
Installation
Install base unit without contact ex-
pander module:
Connect base unit and PNOZsigma
contact expander module:
Installation in control cabinet
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
Ensure that the plug terminator is
inserted at the side of the unit.
Remove the plug terminator at the
side of the base unit and at the con-
tact expander module.
Connect the base unit and the con-
tact expander module to the sup-
plied connector before mounting
the units to the DIN rail.
The safety relay should be installed
in a control cabinet with a protec-
tion type of at least IP54.
Use the notch on the rear of the unit
to attach it to a DIN rail.
Ensure the unit is mounted securely
on a vertical DIN rail (35 mm) by us-
ing a fixing element (e.g. retaining
bracket or an end angle).
Push the unit upwards or down-
wards before lifting it from the DIN
rail.
Terminal configuration
Dimensions
*with spring-loaded terminals
NSG-D-2-405-2008-11
-4