750126 PILZ, 750126 Datasheet - Page 3

• Manufacturer Part Number: 750126
• Description: PNOZ S6.1 24VDC
• Manufacturer: PILZ

Specifications of 750126

• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 8A
• Contact Voltage Ac Nom: 240V
• Contact Voltage Dc Nom: 24V
• No. Of Poles: 3
• Relay Mounting: DIN Rail
• External Width: 22.5mm
• External Depth: 120mm
• Svhc: No SVHC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Two-hand relays
Up to PL e of EN ISO 13849-1
PNOZ s6.1
Function description
Timing diagram
Key
Wiring
Please note:
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: [phone], Telefax: [phone], E-Mail: [e-mail]
The two-hand control relay must be
activated by simultaneously press-
POWER: Supply voltage
Button 1/Button 2: Input circuits
S13-S14, S23-S24
Feedback loop: Feedback loop S34
Output safe: Safety outputs 13-14,
23-24, 33-34
Information given in the “Technical
details” must be followed.
Outputs 13-14, 23-24, 33-34 are
safety contacts, output 41-42 is an
auxiliary contact (e.g. for display).
To prevent contact welding, a fuse
should be connected before the
output contacts (see technical de-
tails).
Calculation of the max. cable runs
l
R
ance (see technical details)
R
Use copper wire that can withstand
60/75 °C.
Sufficient fuse protection must be
provided on all output contacts with
capacitive and inductive loads.
max
lmax
l
/km = cable resistance/km
in the input circuit:
= max. overall cable resist-
ing two buttons within 0.5 s. If one
or both of the buttons are released,
the unit interrupts the control com-
mand for the hazardous movement.
Output aux: Auxiliary contacts 41-
42
Out semi: Semiconductor output
switch status Y32
t
t
0
1
: Recovery time after power on
: Simultaneity, channel 1 and 2
Shaded area: Status irrelevant
Reactivation: The output relays will
not re-energise until both operator
elements have been released and
then re-operated simultaneously.
t
button 1 or 2
t
before the button is operated (re-
covery time)
2
3
: Operating cycle ended through
: S34-S12 must be closed before
NSG-D-2-405-2008-11
-2