96-905.0 EAO, 96-905.0 Datasheet - Page 55

• Manufacturer Part Number: 96-905.0
• Description: LENS, RECTANGULAR, BLACK
• Manufacturer: EAO

Specifications of 96-905.0

• Lens Color: Black
• Lens Width: 17.4mm
• Lens Height: 12.4mm
• Leaded Process Compatible: Yes
• For Use With: 96 Series Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Description
General notes
With the series 92, users have a comprehensive range of applications
at their disposal in the PCB key range. In particular, this series is an
interesting alternative to the membrane switching system, because it
offers convincing advantages, such as: Saving on initial costs, short
manufacturing times, all-over illumination and a reliable and
nevertheless removable PCB fastening technology.
With the series 92, many different applications are possible even as a
discrete switch.
Thanks to front sealing IP 67, and the use of chemical-resistant
materials, the elements of this series are suited for industrial use.
The actuator, measuring 18.8 x 18.8 mm at the front (18.8 x 18.4 mm
IP 40), is available as an indicator, pushbutton or illuminated
pushbutton in marked or unmarked versions.
In order to have matching colours, the actuator element can be supplied
with different colours. The switching element complies with international
protection level IP 40 and is solder-proof on the connection side. The
specially formed connection legs prevent it from falling out when using
flow soldering.
Mounting
The actuators of the series 92 are made for the standard 16 mm dia.
mounting hole and fastened tightly to the front panel by means of a
fixing nut. Mounting torque max. 50 Ncm.
of the actuator. The arrangement of contacts is based on the matrix
dimension 2.54 mm (1/10"). By means of the mounting flange, the PCB
can be snapped on the pre-assembed actuator. Later adjustment is no
longer necessary. The mounting flange is fastened to the PCB with two
1.8 mm dia. screws, also independent of the actuator. The positioning
and the number of flanges is determined by the size of the front panel
or PCB.
The actuators are protected against distortion.
Lenses
The flat front bezel with integrated pressure plate, made of UV resistant
TPE has a black finish (standard). Colour variations enable the
manufacture of transparent pressure plates of different colours.
Marking
For further information about hot stamping, laser marking and film
inserts see part Marking.
Illumination
Perfect illumination of the touch surfaces available in various colours is
assured by the LEDs Bi-Pin T1 in the colours blue, yellow, green,
orange, red and white.
Luminosity and wave length scattering caused by the technology used
in the LED manufacturing processes may lead to visual differences in
our products.
Cleaning of soldered PCB
PCBs are often cleaned after machine soldering. When doing this, care
must be taken to prevent the "cleaning fluid" polluted with dirt, grease
and flux from penetrating the switch.
The switching element is mounted on the printed board independently
55
Product Information
Specimen order
0
We reserve the right to modify technical data
All dimensions in mm
Illuminated pushbutton :
-
Essential accessories :
-
-
-
Illuminated pushbutton actuator, IP 40,
frontring black, lens yellow
Switching element illuminative
Single-LED T1 Bi-Pin, yellow
Mounting flange
12.2008
92-458.400
92-851.342
10-2602.3174D
92-960.0
55
92