704.910.4 EAO, 704.910.4 Datasheet - Page 82

• Manufacturer Part Number: 704.910.4
• Description: SWITCHING ELEMENT, 2NC, 10A, SCREW
• Manufacturer: EAO

Specifications of 704.910.4

• No. Of Poles: 2
• Contact Current Max: 10A
• Contact Voltage Ac Max: 500V
• Contact Voltage Dc Max: 250V
• Switch Terminals: Screw
• Circuitry: DPDT-2NC
• For Use With: EAO Switch 04 Series Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Technical Data
>
Switching system
Material
Mechanical characteristics
0
Electrical characteristics
Slow-make switching element PIT
The double-break, slow-make switching element is equipped with
one or two independent contact systems, acting as normally open
or normally closed contact. The normally closed contact has forced
opening.
Slow-make contacts with forced action are ideal for high switch
ratings.
Up to three switching elements can be snapped to each actuator.
For the emergency-stop pushbutton use the slow-make switching
element (max. 2).
Material of contact
Hardsilver and gold-silver
Switch housing
Polycarbonate (PC)
Terminals
PIT Spring terminal
Skinning 8 mm
Wire cross-section:
Wire 0.2 to 1.0 mm²Stranded wire 0.2 to 1.0 mm² without core and
sleeve
Stranded wire 0.2 to 0.75 mm² with core and sleeve
Tightening torque
Screws at the mounting flange max. 25 Ncm
Actuating force
1 Normally closed 2 N
1 Normally open 3.1 N
Actuating travel
5.8 mm ± 0.2 mm
Rebound time
≤1 ms
Mechanical lifetime
(with 1 switching element)
Pushbutton maintained action
Pushbutton momentary action
Selector switch maintained action 1.25 million Cycles of operation
Selector switch momentary action 2.5 million
Emergency-stop switch
Keylock switch maintained action 25 000
Keylock switch momentary action 50 000
Standards
The switches comply with EN IEC 60947-1 / EN IEC 60947-5-1
Rated Insulation Voltage U
500 VAC / 600 VDC, as per EN IEC 60947-5-1
Contact resistance
New state ≤50 mΩ as per DIN IEC 60512-2-4
Isolation resistance
≥10 MΩ between open contacts at 500 VDC, as per DIN IEC 60512-
2-10
80
07.2010
i
1.5 million
3 million
50 000
Cycles of operation
Cycles of operation
Cycles of operation
Cycles of operation
Cycles of operation
Cycles of operation
0
0
0
0
Approvals
>
Material
Mechanical characteristics
Electrical characteristics
Lamp block PIT
Electrical life
50 000 cycles of operations
Conventional free air thermal current I
6 A, as per EN IEC 60947-5-1
the maximum current in continuous operation and at ambient
temperature must not exceed the quoted maximum values.
Switch rating
At switch rating AC for gold-silver and hardsilver contacts, service
category AC-15, as per EN IEC 60947-5-1 (cosφ 0.3)
Voltage
Current
At switch rating DC for gold-silver and hardsilver contacts, service
category DC-13, as per EN IEC 60947-5-1
Voltage
Current
Recommended minimum operational data
Gold-silver contacts:
Voltage
Current
Hardsilver contacts:
Voltage
Current
Protection class
Indicators and switches, fit for mounting into devices with protection
class II
Approbations
CB (IEC 60947)
CCC
CSA
Germanischer Lloyd
GOST
NFF 16-102
Declaration of conformity
CE
Housing
Polycarbonate (PC)
Terminals
PIT Spring terminal
Skinning 8 mm
Wire cross-section:
Wire 0.2 to 1.0 mm²Stranded wire 0.2 to 1.0 mm² without core and
sleeve
Stranded wire 0.2 to 0.75 mm² with core and sleeve
Standards
The switches comply with EN IEC 60947-1 / EN IEC 60947-5-1
250 VAC
6 A
24 VDC
6 A
24 VDC
5 mA
24 VDC
50 mA
110 VDC
1.0 A
th
04