HW1A-B1-B IDEC, HW1A-B1-B Datasheet - Page 29

• Manufacturer Part Number: HW1A-B1-B
• Description: PUSHBUTTON SWITCH
• Manufacturer: IDEC

Specifications of HW1A-B1-B

• Actuator / Cap Color: Black
• For Use With: YS Series IEC Contactors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Mounting and Removing Auxiliary Contact Block on the Contactor
Top Mount Style
Removal Procedure
Side-Mount Style
DIN rail Mounting
Removal Procedure
www.idec.com
1. Position the contactor and the auxiliary contact block in the
same direction.
2. Insert the auxiliary contact block into the area of the top of
the contactor. Slide the auxiliary contact until it bottoms (Do
not force.) Make sure that the locking hook is locked into posi-
tion as shown
While lightly lifting the locking hook with your finger, slide the
auxiliary contact unit out.
1. Contactor plunger
2. Inside this area, there are locking hooks (upper and lower areas)
1. Make sure that the auxiliary contact block (right or left side) and the terminal
numbers on the contactor are in the same direction.
2. Push the plunger of the contactor downwards approximately 2mm. While hold-
ing the plunger in this manner, insert the white protruding portion of the auxiliary
contact block into the square groove of the side of the contactor. Make sure that
the locking hook is locked into position.
Hold the auxiliary contact block and pull it off.
IEC Contactors
USA: (800) 262-IDEC or [phone], Canada: (888) 317-IDEC
Specifications
D-29
D