680-4000-WO EAO, 680-4000-WO Datasheet - Page 8

• Manufacturer Part Number: 680-4000-WO
• Description: ACTUATOR, MOMENTARY, IP65
• Manufacturer: EAO

Specifications of 680-4000-WO

• Operating Force Max: 2N
• Svhc: No SVHC (18-Jun-2010)
• Approval Bodies: VDE, UL, CSA, SEV, SEMKO
• Contact Current @ Contact Voltage Ac Max: 6A
• For Use With: Swisstac Series Illuminated Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Mounting Instruction
The switch is mounted in a fascia/control panel in three steps:
1. Remove front section as in drawing
2. Insert switch from back side in fascia/control panel
3. Snap on front section (see Note) and tighten fixing nut
Zero position
To assemble, the key must be at the zero position, the symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost.
The switch is mounted in a fascia/control panel in three steps:
1. Remove front section as in drawing
2. Insert switch from back side in fascia/control panel
3. Snap on front section (see Note) and tighten fixing nut.
Zero position
To assemble, the key must be at the zero position, the symbol 0 is at the top, and on the terminal block the circuit diagram is uppermost.
The switch is mounted in a fascia or control panel in three steps:
1. Detach terminal block as in drawing, remove fixing nut
2. Insert switch from front side in fascia/control panel
3. Reassemble the switch in the reverse order
keylock switch 55 mm
keylock switch 70 mm
selector switch 45 mm
588
01.2002
To detach terminal block
Wiring diagram
Wiring diagram
Swisstac