1.30.243.001/0300 RAFI, 1.30.243.001/0300 Datasheet - Page 5

• Manufacturer Part Number: 1.30.243.001/0300
• Description: SWITCH, PUSHBUTTON, ESTOP, ILLUMINATED
• Manufacturer: RAFI

Specifications of 1.30.243.001/0300

• Operating Force Max: 5N
• Mounting Hole Dia: 22.3mm
• For Use With: RAFIX 22 QR Emergency Stop Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RAFIX 22 QR
Control Components
The RAFIX 22 QR control component
range meets all the technical require-
ments and current standards for
control units. The system is of modu-
lar design. Actuators, contact blocks
and lamp sockets can be combined
freely. This means that you may
Sequence of assembly/disassembly at screw, cage clamp
and quick connect terminals
• Fix the actuator in the front panel
• Snap the individual elements (a ma-
• Insert the lamp or LED into the lamp
Approvals
Part no.
1.20 124.– – –
1.20 125.– – –
1.30 243.– – –
1.71 213.– – –
1.71 214.– – –
Dimensioned drawing
with the ring nut.
ximum three contact blocks or two
contact blocks together with a lamp
socket) in the coupling. You can in-
stall them on any assembling axis.
socket.
30.00
zert.
BG
implement modifications
of design or configuration
even at the last minute.
An additional positive
effect is the reduction of
stockholding costs.
Panel cut-out according to
IEC 60947-5-1
All actuators are provided with a
locating lug which may be removed
using a screwdriver for installation
into mounting holes if required.
With a grid spacing of 30 mm
horizontally and 50 mm vertically,
the collars of the square actuators
touch each other. We revommend to
use the same grid spacing also for
the round collar shapes (IEC 947).
• Snap the coupling with
• Connect the cables.
• Disassembly is performed in
the contact blocks on to
the actuator.
reverse order. To remove the
coupling from the actuator, the
latch lever must be pressed
(by hand or with a screwdriver).
0660
VDE
10/15
Assembly
ULc
= approved,
Disassembly
GL
= pending
2 - 87
RAFIX
22 QR
2