1.30.243.001/0300 RAFI, 1.30.243.001/0300 Datasheet - Page 4

• Manufacturer Part Number: 1.30.243.001/0300
• Description: SWITCH, PUSHBUTTON, ESTOP, ILLUMINATED
• Manufacturer: RAFI

Specifications of 1.30.243.001/0300

• Operating Force Max: 5N
• Mounting Hole Dia: 22.3mm
• For Use With: RAFIX 22 QR Emergency Stop Pushbutton Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2
RAFIX
22 QR
RAFIX 22 QR
2 - 86
Terminals
The RAFIX 22 QR contact blocks are available in different
connection styles as required for your application:
• Screw terminals
• Quick connect/solder terminals 6.3 x 0.8 mm
• Cage clamp terminals
• RJ 12-terminal
Your
This offers your savings in three ways:
• Drastically reduced assembly time thanks to wire
• You save material: No wire end sleeves are required.
• You save the time previously required for mounting the
The terminals are open and the captive screws are
mounted in the terminal recess.
Simply insert a screwdriver to open the terminal, insert
the cable and remove the screwdriver to close the termi-
nal.
Just plug in the cable with a RJ 12 connector.
insertion from the rear, i. e. no more bending and lateral
insertion of the wires required.
wire end sleeves.
advantage
this special seal is firmly seated on
the housing (degree of protection
IP 65 to DIN).
Sealed for life against
humidity and dirt
move up and down the shaft,
The special seal reliably
other sealing types which
dust from penetrating to the
contact block. In contrast to
prevents moisture, oil and
:
Assembly
Screw terminals
Insert the wire.
Tighten the screw.
Done.
Versatility of design for customized panels
The RAFIX 22 QR system does not only have a
particularly low profile and is also available in
many different versions. Your design options for
your customized panels are nearly unlimited
thanks to the interchangeable front rings and
lenses. In this way you can achieve an attrac-
tive design while ensuring safe operation of
your equipment at the same time.
RAFIX 22 QR components are available
either with a round or with a square collar.
Cage clamp terminals
Open the terminal.
Insert the wire.
Remove the screwdriver.
Control Components