S29AL016D70TFI010 Spansion Inc., S29AL016D70TFI010 Datasheet - Page 35

• Manufacturer Part Number: S29AL016D70TFI010
• Description: Flash Memory IC
• Manufacturer: Spansion Inc.

Specifications of S29AL016D70TFI010

• Memory Size: 16Mbit
• Memory Configuration: 2M X 8 / 1M X 16
• Ic Interface Type: Parallel
• Access Time: 70ns
• Memory Case Style: TSOP
• No. Of Pins: 48
• Operating Temperature Range: -40°C To +85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Absolute Maximum Ratings
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage transitions, A9, OE#, and
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or any other conditions above those indicated in the op-
erational sections of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for
extended periods may affect device reliability.
December 17, 2004 S29AL016D_00_A2
to –2.0 V for periods of up to 20 ns. See
voltage transitions, input or I/O pins may overshoot to V
RESET# may overshoot V
A9 is +12.5 V which may overshoot to 14.0 V for periods up to 20 ns.
than one second.
Storage Temperature
Plastic Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65°C to +150°C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–65°C to +125°C
Voltage with Respect to Ground
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
V
A9, OE#, and RESET# (Note 2) . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
CC
(Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
SS
Figure 7. Maximum Negative Overshoot Waveform
Figure 8. Maximum Positive Overshoot Waveform
+2.0 V
+0.5 V
to –2.0 V for periods of up to 20 ns. See
2.0 V
+0.8 V
–0.5 V
–2.0 V
V
V
CC
CC
P r e l i m i n a r y
Figure
20 ns
7. Maximum DC voltage on input or I/O pins is
20 ns
S29AL016D
CC
20 ns
20 ns
+2.0 V for periods up to 20 ns. See
20 ns
Figure
7. Maximum DC input voltage on pin
CC
+0.5 V
V
Figure
CC
+0.5 V. During
8.
SS
35