PIC16C765-I/PT Microchip Technology, PIC16C765-I/PT Datasheet - Page 69

• Manufacturer Part Number: PIC16C765-I/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C765-I/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 24MHz
• Connectivity: SCI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.35 V ~ 5.25 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3 bit
• Operating Supply Voltage: 4.35 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT44PT3 - SOCKET TRAN ICE 44MQFP/TQFPAC164305 - MODULE SKT FOR PM3 44TQFPISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 10-10: BUFFER DESCRIPTOR STATUS REGISTER. BITS WRITTEN BY THE MCU
Note:
2000 Microchip Technology Inc.
bit7
bit 7:
bit 6:
bit 5-4: Reserved: Read as ’X’
bit 3:
bit 2:
bit 1-0: Reserved: Read as ’X’
UOWN
W-X
Recommend that users not use BSF, BCF due to the dual functionality of this register.
an incorrect DTS, it will be ignored and the buffer will remain unchanged.
UOWN: USB Own
This UOWN bit determines who currently owns the buffer. The SIE writes a 0 to this bit when it has com-
pleted a token. This byte of the BD should always be the last byte the MCU updates when it initializes a
BD. Once the BD has been assigned to the USB, the MCU should not change it in any way.
1 = USB has exclusive access to the BD. The MCU should not modify the BD or buffer.
0 = The MCU has exclusive access to the BD. The USB ignores all other fields in the BD.
DATA0/1: This bit defines the type of data toggle packet that was transmitted or received
1 = Data 1 packet
0 = Data 0 packet
DTS: Setting this bit will enable the USB to perform Data Toggle Synchronization. If a packet arrives with
1 = Data Toggle Synchronization is performed
0 = No Data Toggle Synchronization is performed
BSTALL: Buffer Stall
Setting this bit will cause the USB to issue a STALL handshake if a token is received by the SIE that would
use the BD in this location. The BD is not consumed by the SIE (the own bit remains and the rest of the
BD are unchanged) when a BSTALL bit is set.
DATA0/1
W-X
(BDndST: 1A0h, 1A4h, 1A8h, 1ACh, 1B0h, 1B4h)
U-X
—
U-X
—
DTS
W-X
Preliminary
BSTALL
W-X
U-X
—
PIC16C745/765
U-X
—
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
-n = Value at POR reset
X = Don’t care
read as ‘0’
DS41124C-page 69