DSPIC30F1010T-30I/MM Microchip Technology, DSPIC30F1010T-30I/MM Datasheet - Page 62

• Manufacturer Part Number: DSPIC30F1010T-30I/MM
• Description: 6KB, Flash, 256bytes-RAM, 30MIPS, 21I/O, 16-bit Family,nanoWatt 28 QFN-S 6x6mm T
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010T-30I/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Data Bus Width: 16 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 30 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240002, DM300023, DM330011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCK
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: DSPIC30F1010T-30I/MMTR

APPENDIX B:
Flash programmers process the standard HEX format
used by the Microchip development tools. The format
supported is the Intel
Please refer to Appendix A in the “MPASM User’s
Guide” (DS33014) for more information about hex file
formats.
The basic format of the hex file is:
:BBAAAATTHHHH...HHHHCC
Each data record begins with a 9-character prefix and
always ends with a 2-character checksum. All records
begin with ‘:’ regardless of the format. The individual
elements are described below.
• BB - is a two-digit hexadecimal byte count
• AAAA - is a four-digit hexadecimal address
• TT - is a two-digit record type that will be ‘00’ for
• HHHH - is a four-digit hexadecimal data word. For-
• CC - is a two-digit hexadecimal checksum that is
DS70102K-page 62
representing the number of data bytes that appear
on the line. Divide this number by two to get the
number of words per line.
representing the starting address of the data
record. Format is high byte first followed by low
byte. The address is doubled because this format
only supports 8-bits. Divide the value by two to
find the real device address.
data records, ‘01’ for end-of-file records and ‘04’
for extended-address record.
mat is low byte followed by high byte. There will
be BB/2 data words following TT.
the two’s complement of the sum of all the
preceding bytes in the line record.
HEX FILE FORMAT
®
HEX 32 Format (INHX32).
Because the Intel hex file format is byte-oriented, and
the 16-bit program counter is not, program memory
sections require special treatment. Each 24-bit
program word is extended to 32 bits by inserting a so-
called “phantom byte”. Each program memory address
is multiplied by 2 to yield a byte address.
As an example, a section that is located at 0x100 in
program memory will be represented in the hex file as
0x200.
The hex file will be produced with the following con-
tents:
:020000040000fa
:040200003322110096
:00000001FF
Notice that the data record (line 2) has a load address
of 0200, while the source code specified address
0x100. Note also that the data is represented in “little-
endian” format, meaning the Least Significant Byte
(LSB) appears first. The phantom byte appears last,
just before the checksum.
© 2010 Microchip Technology Inc.