ITS410E2 Infineon Technologies, ITS410E2 Datasheet - Page 15

• Manufacturer Part Number: ITS410E2
• Description: IC, HIGH SIDE POWER SWITCH, 42V, TO220-5
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of ITS410E2

• Power Load Switch Type: High Side
• Input Voltage: 42V
• On State Resistance: 0.22ohm
• Thermal Protection: Yes
• Power Dissipation Pd: 50W
• No. Of Outputs: 1
• Internal Switch: No
• Current Limit: 5A
• Input Type: Non-Inverting
• Number Of Outputs: 1
• On-state Resistance: 190 mOhm
• Current - Output / Channel: 1.8A
• Current - Peak Output: 5A
• Voltage - Supply: 4.7 V ~ 42 V
• Operating Temperature: -30°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: TO-220-5 (Bent and Staggered Leads)
• Switch Type: High Side
• Power Switch Family: ITS 410 E2
• Power Switch On Resistance: 190mOhm
• Output Current: 1.6A
• Mounting: Through Hole
• Supply Current: 1mA
• Package Type: TO-220AB
• Operating Temperature (min): -30C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Pin Count: 5 +Tab
• Power Dissipation: 50W
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: SP000221219

Package and Ordering Code
All dimensions in mm
Standard PG-TO220AB/5
PG-TO220AB/5, Option E3043
Infineon Technologies AG
ITS 410 E2 E3043
ITS 410 E2
Ordering code
SP000221219
SP000221227
Ordering code
15
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2006
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written
approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the
failure of that life-support device or system, or to affect the
safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be
endangered.
PROFET ® ITS 410 E2
2006-Mar-28