SCC68692C1N40 NXP Semiconductors, SCC68692C1N40 Datasheet - Page 13

• Manufacturer Part Number: SCC68692C1N40
• Description: IC, CMOS, DUAL UART, 68692, DIP40
• Manufacturer: NXP Semiconductors

Specifications of SCC68692C1N40

• No. Of Channels: 2
• Uart Features: Quadruple Buffered Receiver Data Register
• Supply Voltage Range: 4.5V To 5.5V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: DIP
• No. Of Pins: 40
• Data Rate: 115.2Kilobaud
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Philips Semiconductors
2. Enable transmitter, if not already enabled
3. Assert RTSN via command
4. Send message
5. After the last character of the message is loaded to the THR,
6. The last character will be transmitted and the RTSN will be reset
1998 Sep 04
Dual asynchronous receiver/transmitter (DUART)
disable the transmitter. (If the transmitter is underrun, a special
case exists. See note below.)
one bit time after the last stop bit is sent.
13
NOTE: The transmitter is in an underrun condition when both the
TxRDY and the TxEMT bits are set. This condition also exists
immediately after the transmitter is enabled from the disabled or
reset state. When using the above procedure with the transmitter in
the underrun condition, the issuing of the transmitter disable must be
delayed from the loading of a single, or last, character until the
TxRDY becomes active again after the character is loaded.
SCC68692
Product specification