SCA3000-E01 VTI Technologies, SCA3000-E01 Datasheet - Page 14

• Manufacturer Part Number: SCA3000-E01
• Description: ACCELEROMETER 3-AXIS +/-3G SPI
• Manufacturer: VTI Technologies
• Series: SCA3000r

Specifications of SCA3000-E01

• Axis: X, Y, Z
• Acceleration Range: ±3g
• Sensitivity: 1000 counts/g
• Voltage - Supply: 2.35 V ~ 3.6 V
• Output Type: Digital
• Interface: SPI
• Mounting Type: Surface Mount
• Package / Case: 18-SMD
• For Use With: 551-1041 - SCA3000-D01 DEMOKIT551-1038 - BOARD PWB W/SCA3000-E01
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Bandwidth: -
• Other names: 551-1037-2; SCA3000-E01-10

2.8 Clock
VTI Technologies Oy
www.vti.fi
The interrupt polarity (active high/low) can be configured with INT_MASK register's INT_ACT bit.
Once the interrupt has happened, the INT_STATUS register must be read to acknowledge the
interrupt.
See section 3.3 for INT_STATUS register details.
The SCA3000 has an internal factory trimmed oscillator and clock generator. Internal frequencies
vary product by product.
1. If at least one of MD bits in INT_STATUS register is "1", motion has been detected.
2. If FFD bit in INT_STATUS register is "1", free-fall has been detected.
3. If BUF_FULL bit is "1", Ring Buffer is 75% full. Correspondingly, if BUF_HALF is "1", the
Ring Buffer is 50% full.
Doc.Nr. 8257300A.07
SCA3000 Series
Rev.A.07
14/ 43