MNZB-EVB-900-B0 MeshNetics, MNZB-EVB-900-B0 Datasheet - Page 32

• Manufacturer Part Number: MNZB-EVB-900-B0
• Description: BOARD EVAL FOR MNZB-900-B0 W/ANT
• Manufacturer: MeshNetics
• Type: 802.15.4/Zigbeer

Specifications of MNZB-EVB-900-B0

• Frequency: 868MHz, 915MHz
• For Use With/related Products: MNZB-900-B0
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 758-1008

© 2008 MeshNetics
Option
BOOTRST
CKDIV8
CKOUT
SUT_CKSEL
Figure 7. Fuse bits setting
Make sure the following hex values appear in the bottom part of Fuses tab:
If the node is to be programmed with the use of Serial Bootloader, enable additionally the
BOOTRST option. Make sure the following hex value string appears at the bottom of Fuses
tab:
By default, each of the boards (MCU) is preprogrammed with this fuse setting.
In addition, JTAG can be used to restore the device's ability to respond to Serial
Bootloader commands. Serial Bootloader firmware can be reprogrammed with JTAG by
selecting bootloader.hex image contained in your ZDK 900 Distribution CD and
uploading it to the device.
0xFF, 0x9D, 0x62.
0xFF, 0x9C, 0x62.
Z I G B I T ™ 9 0 0 D E V E L O P M E N T K I T 1 . 3
Value
Disabled
Enabled
Disabled
Int. RC Osc.; Start-up time: 6 CK + 65 ms
U S E R ’ S G U I D E
Page 32/56