AS5013-DB-2.1 austriamicrosystems, AS5013-DB-2.1 Datasheet - Page 6

• Manufacturer Part Number: AS5013-DB-2.1
• Description: BOARD DEMO EASYPOINT
• Manufacturer: austriamicrosystems
• Series: EasyPoint™r

Specifications of AS5013-DB-2.1

• Main Purpose: Interface, Hall Effect Sensor Human Interface Device (HID)
• Embedded: No
• Utilized Ic / Part: N40P112
• Primary Attributes: Analog Joystick with 3 Buttons
• Secondary Attributes: USB Interface
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AS5013-DB-2.1
Demoboard and Software Operation Manual
Now Follow the instructions:
Center the joystick (release it) and click Next.
Center the joystick again (release it) and click Next.
Pushing the EP Button and Button
Pushing Button
Pushing Button
Once the calibration finished and verified, click on OK to exit the configuration mode.
Now the joystick is fully operational, and can be used by any Windows program supporting a joystick, or by the AS5013
Evaluation Software (see next chapter).
The calibration has to be done only the first time
the demoboard is plugged into the PC.
If a different demoboard is used, a new calibration
must be performed.
The link to the Joystick Calibration window can be
found in the main window menu Setup.
www.austriamicrosystems.com
on the board activates the button 2 indicator.
on the board activates the button 3 indicator.
Note
activates the button 1 indicator.
Revision 1.01
Do circular movements of the joystick with maximum
amplitude.
Click Next until the end of the procedure.
Select the Test tab. The cursor on the screen should now
follow the position of the knob, and must reach the four
edges of the square. If the knob is released, the cursor
should be positioned on the center of the square.
6 – 16