RM4000 Tektronix, RM4000 Datasheet - Page 10

• Manufacturer Part Number: RM4000
• Description: Benchtop Oscilloscopes Rackmount Kit for DPO4000/MSO4000
• Manufacturer: Tektronix

Specifications of RM4000

• Equipment Type: Rackmount Kit
• Accessory Type: Rackmount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DPO4000 and MSO4000 Series Oscilloscopes

UltraTrak RM4000
Step 7: Enter the Password
Step 8: Assign a SCSI ID
You are prompted for a password each time you access the UltraTrak
Configuration Mode. A password consists of four digits. The default
password is 0000.
Password entry begins with the left-most digit. You must enter the proper
value before proceeding to the next digit. Change the value of the active
password digit by pressing either the
button increments the digit downward (as, 0, 9, 8, 7 …). The
increments the digit upward (as, 0, 1, 2, 3 …).
Press the SEL button to proceed to the next digit or to submit the
password if you have just entered the last digit. You are given access to
the Configuration menu if you entered the password correctly.
Each device on a SCSI chain must have a unique ID. The default SCSI
ID setting of the UltraTrak is 0. If you need to change the SCSI IDE
setting of the UltraTrak, do the following:
1. At the Configuration menu, press the
2. At the Configure SCSI menu, press the
3. At the SCSI ID menu, press the
4. Press the EXIT button until you return to the Idle mode.
Please Enter Password:
0 0 0 0
SCSI. Then press the SEL button.
Then press the SEL button.
ID number. Then press the SEL button.
10
The active password digit is marked
by an underscore.
and
button or the
button to select Configure
buttons to select the SCSI
button to select SCSI ID.
button. The
button