ACD-20SW Amprobe, ACD-20SW Datasheet - Page 3

• Manufacturer Part Number: ACD-20SW
• Description: Clamp Multimeters & Accessories 400A SWIVEL CLAMP
• Manufacturer: Amprobe
• Type: Current Clampr

Specifications of ACD-20SW

• Ranging: Auto, Manual
• Accuracy: + / - 0.5 %
• Frequency: 50 Hz to 500 Hz
• Maximum Ac Current: 40 A, 400 A
• Voltage: 400 mV, 4 V, 40 V, 400 V, 600 V
• Features: Test leads, installed battery, user manual, carrying case included
• Dmm Type: Clamp
• Voltage Measuring Range Dc: 400mV To 600V
• Voltage Measuring Range Ac: 4V To 600V
• Current Measuring Range Ac: 40A To 400A
• No. Of Digits / Alpha: 3-3/4
• Battery Life: 200 hours typical with carbon-zinc.400 hours typical with alkaline
• Battery Type: (2) AAA
• Dimensions: 12" × 5.3" × 1.2"
• Jaw Opening: 30 mm (1.18 In.) conductor
• Polarity: Automatic, positive implied, negative polarityindication
• Resistance, Range: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
• Voltage Range: 600 V
• Voltage, Range, Ac: 4 V, 40 V, 400 V, 600 V
• Voltage, Range, Dc: 400 mV, 4 V, 40 V, 400 V, 600 V
• Weight: 1.26 Lbs.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: 3472723

ACD-20SW Swivel Clamp Meter
Resistance
Continuity
Diode Test
Non-Contact Voltage Indicator
Auxiliary Features
Disable Auto Power Off
Noise Filter
Amprobe® Test Tools
Ranges
Resolution
Accuracy
Open Circuit Volts
Overload Protection
Range
Resolution
Audible Indication
Response Time
Overload Protection
Test current
Accuracy
Resolution
Open Circuit Volts
Audibe Indication
Overload Protection
Hold
Range
400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
0.1Ω
±(1.0% rdg + 4 dgts) on 400Ω to 400kΩ ranges
±(1.5% rdg + 4 dgts) on 4MΩ range
±(3.0% rdg + 5 dgts) on 40MΩ range
-0.45V dc typical, (-1.2Vdc on 400Ω range)
600VDC or AC rms
400Ω
1Ω
Less than 25Ω
500ms
600VDC or AC rms
1.2mA (appreximate)
±(3.0% rdg + 3 dgts)
10mV
3.0Vdc typical
< 0.25V
600VDC or AC rms
Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works
when meter dial is on any ranges.
Freeze the latest reading on the display.
Excute manual range mode.
Set the DMM to off position, press (RANGE) button, and hold the (RANGE) button while turning the
rotary knob to the desired range position. Release the button when LCD displays normally. Note
“APO” annunciator is missing from the LCD. The Auto Power Off mode is activated with an “APO”
symbol indicating on LCD.
stable and consistent readings in electrically noisy environments. Pass lamp dimmer test and variable
fre-quency drive test.
www.Amprobe.com
Data Sheet