ENW-89818C2JF Panasonic, ENW-89818C2JF Datasheet - Page 19

• Manufacturer Part Number: ENW-89818C2JF
• Description: Bluetooth / 802.15.1 Modules & Development Tools CC2560 HCI module no antenna
• Manufacturer: Panasonic

Specifications of ENW-89818C2JF

• Interface Type: I2C, SPI, UART
• Data Rate: 4 Mbps
• Operating Voltage: 3.3 V
• Board Size: 6.5 mm x 9 mm
• Operating Temperature Range: - 20 C to + 70 C
• Output Power: 10.5 dBm
• Technology/ Type: HCI Module
• Processor Series: CC2560
• For Use With/related Products: EVAL-PAN1315
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN1315
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
11.8. BLUETOOTH/PCM CLOCK MISMATCH HANDLING
11.9. BLUETOOTH INTER-IC SOUND (I2S)
11.10. CURRENT CONSUMPTION FOR DIFFERENT BLUETOOTH SCENARIOS
• Repeat a configurable sample of 8 to 24 bits (depends on the real sample size), in
order to simulate silence (or anything else) in the PCM bus. The configured sample will
be written in a specific register for each channel.
The choice between those two options is configurable separately for each channel.
In Bluetooth RX, the CC2560 receives RF voice packets and writes these to the codec
I/F. If the CC2560 receives data faster than the codec I/F output allows, an overflow will
occur. In this case, the Bluetooth has two possible behaviour modes: ‘allow overflow’
and ‘don’t allow overflow’.
• If overflow is allowed, the Bluetooth will continue receiving data and will overwrite any
data not yet sent to the codec.
• If overflow is not allowed, RF voice packets received when buffer is full will be
discarded.
The CC2560 can be configured as an Inter-IC Sound (I2S) serial interface to a I2S
codec device. In this mode, the CC2560 audio codec interface is configured as a bi-
directional, full-duplex interface, with two time slots per frame: Time slot 0 is used for the
left channel audio data and time slot 1 for the right channel audio data. Each time slot is
configurable up to 40 serial clock cycles in length and the frame is configurable up to 80
serial clock cycles in length.
The following table gives average current consumption for different Bluetooth scenarios.
Conditions: VDD_IN = 3.6 V, 25°C, 26-MHz fast clock, nominal unit, 4 dBm output
power.
CLASS 1 or 2 BLUETOOTH MODULE
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89818C2JF
No.
DS-1315-2400-102
PAGE
DATE
www.pedeu.pansonic.de
23.05.2011
19 of 41
REV.
1.03