SUPERPRO5004EGP Xeltek, SUPERPRO5004EGP Datasheet - Page 58

• Manufacturer Part Number: SUPERPRO5004EGP
• Description: Programmers & Debuggers UNIVERSAL PIN DRIVER 144 PIN DRIVE
• Manufacturer: Xeltek

Specifications of SUPERPRO5004EGP

• Positions/sockets: 144
• Description/function: Economy ultra-high speed, 144? pin universal gang programmer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10. Select Save Project on the Setting screen to save all of the current settings into a
Start Producer Mode
1. Select the Setting icon on the Toolbar. The system displays the Setting Mode
2. Select Producer and OK.
The system displays the Setting screen.
3. Select Browse to open the project file you saved in the Administrator mode.
Program the Chips
The operation steps for programming a chip, as set in Edit Auto, are follows:
• Blank Check
• Program
• Verify
• Security or Protect if encryption is required
1. To write the data in the memory buffer into the chips, select Auto from the
Superpro
inserted the chip, the system automatically starts the auto batch processing
command.
specified project.
screen.
Refer to the Setting Screen (Producer) section on page 50 for more information.
Notes: Y ou can skip this step if the chip is brand new.
Note: This step is necessary. The chip must pass Verification before the
Note: You may need to set the configuration word before performing
®
The Blank Check will fail on chips containing some information that can
be erased. In this case, perform the Erase operation first. You do not
need to erase EPROM chips for which the data can be overwritten.
programming can be implemented. Some chips provide only the
accumulation check function, such as VerifyCRC instead of a
unit‐to‐unit check function. Very few chips do not provide the
accumulation check function.
encryption. Refer to Device Configuration Word on page 47 for more
information.
5004GP User’s Guide
58