SUPERPRO5004EGP Xeltek, SUPERPRO5004EGP Datasheet - Page 40

• Manufacturer Part Number: SUPERPRO5004EGP
• Description: Programmers & Debuggers UNIVERSAL PIN DRIVER 144 PIN DRIVE
• Manufacturer: Xeltek

Specifications of SUPERPRO5004EGP

• Positions/sockets: 144
• Description/function: Economy ultra-high speed, 144? pin universal gang programmer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Buffer
The Buffer view of the Operation Option screen is illustrated below.
The default programming method is to program the device from the start address
to the end address. However, you may choose to program only a part of the chip,
such as with most E/EPROM (FLASH) devices.
Note: Most single‐chip microcomputers do not allow a change to the start
1. For each file, enter the Start Address.
2. For each file, enter the End Address.
Superpro
options. These options refer to the voltage of the pin VCC, which may vary
when the programmer verifies the data. The manufacturer provides the
MinVcc and MaxVcc values for verifying the data.
VCC(+/‐ 5%) or VCC(+/‐ 10%) is adopted for the verification. If VCC = 5.00V,
select one of the following options:
• VCC = 5.00V and verify the data once
• VCC = 4.75V and VCC = 5.25V, and verify the data twice (+/‐ 5%)
• VCC = 4.50V and VCC=5.50V, and verify the data twice (+/‐ 10%)
address of the device.
®
5004GP User’s Guide
40