STM32-P103 Olimex Ltd., STM32-P103 Datasheet - Page 9

• Manufacturer Part Number: STM32-P103
• Description: MCU, MPU & DSP Development Tools HDR BRD FOR STM32F103RBT6
• Manufacturer: Olimex Ltd.

Specifications of STM32-P103

• Processor To Be Evaluated: STM32F103RBT6
• Data Bus Width: 32 bit
• Interface Type: USB, CAN, I2C, JTAG, SPI, UART
• Dimensions: 100 mm x 90 mm
• Operating Supply Voltage: 3.3 V
• Tool Type: Prototyping Board
• Core Architecture: ARM
• Cpu Core: ARM Cortex M3
• Silicon Manufacturer: ST Micro
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701513 25R5110

RTS_E
CTS_
CP_
WP_
3.3V_
E
E
E
MCU_E
2. CNTRL/HS is connected to HS side
High speed of output CAN drivers (>20v/uS) – No slope control
3. CNTRL/HS is connected to CNTRL side
Enable PC10(pin 51) of STM32F103RBT6
driver modes. Log. 1 of PC10 disable CAN driver. Log. 0 of
PC10enable CAN driver with high speed mode.
Default state - open
Connect PA1/USART2_RTS pin to COM port driver(ST3232).
USART2_RTS function of PA1 is used for handshake mode of
COM port.
Default state - open
Connect
driver(ST3232). USART2_CTS function of PA1 is used for
handshake mode of COM port. By default is used Wake Up
function(PA is permanent tied to Wake Up button).
Default state – open
Card Present Enable – Allow PC7(pin 38) to detect Multi Media
Card present in socket. Log. 1 of PC7 – MMC present. Log.0 of
PC7 – Card absent.
Default state closed (shorten)
Write Protect Enable – Allow PC6(pin 37) to detect write
protected state of Multi Media Card. Log. 1 of PC6 – MMC no
write protected . Log.0 of PC7 – MMC is write protected.
Default state closed (shorten)
power pins. 3.3V_MCU_E jumper is used if you need to
measure current consumption of the microcontroller.
Default state closed (shorten)
Connect 3.3V regulated voltage to STM32F103RBT6
PA0-WKUP/USART2_CTS
pin
CNTRL/HS
CNTRL/HS
to
to
control
COM
CAN
port