EA STARTEDIP240J ELECTRONIC ASSEMBLY, EA STARTEDIP240J Datasheet - Page 21

• Manufacturer Part Number: EA STARTEDIP240J
• Description: LCD Graphic Display Modules & Accessories Starter/Demoboard w/Touch USB prog
• Manufacturer: ELECTRONIC ASSEMBLY

Specifications of EA STARTEDIP240J

• Fluid Type: FSTN Positive
• Module Size (w X H X T): 96 mm x 60.4 mm x 10.8 mm
• Viewing Area (w X H): 91.18 mm x 56.3 mm
• Backlighting: Black / White
• Background Color: White
• Operating Temperature Range: - 20 C to + 70 C
• Attached Touch Screen: Yes
• Interface: RS-232, I2C BUS, or SPI BUS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Zeppelinstraße 19 · D-82205 Gilching · Phone [phone] · Fax [phone] · www.lcd-module.de · [e-mail]
DIMENSIONS
ALUMINIUM BEZEL
embedded LCD-DISPLAY
240x128 WITH INTELLIGENCE
EA 0FP241-7SW:
dimensions in mm
Notes on handling and operation
- LC dispalys are designed for hand soldering only.
- The following can lead to the electronic
- The power supply must be disconnected before the
- The display and the touch screen are made of
- The module is designed only for operation within
Reflow and wave soldering may destroy lcd
immediately
destruction of the module: cross-polarity or
overvoltage of the power supply, overvoltage or
cross-polarity or static discharge at the inputs,
short-circuits at the outputs.
module is removed. All inputs must also be free of
voltage.
plastic and must not come into contact with hard
objects. The surfaces can be cleaned with a soft
cloth. No solvents may be used.
buildings. Additional measures must be taken to
allow operation in the open air. The maximum
temperature range of -20 through +70°C must not
be exceeded. The module may not operate
correctly and may fail if used in a humid
environment. The display must be shielded from
direct sunlight.
(ESD / EMV)
J2: switch off Small Protocoll
J6: Connect Metal frame with GND
all dimensions are in mm
handling precautions!
ATTENTION
12.2010