TLE8250G Infineon Technologies, TLE8250G Datasheet - Page 19

• Manufacturer Part Number: TLE8250G
• Description: IC TXRX CAN HS DSO-8
• Manufacturer: Infineon Technologies

Specifications of TLE8250G

• Packages: PG-DSO-8
• Transmission Ratemax: 1.0 Mbit/s
• Quiescent Current (max.): < 15 µA @ 5V standby
• Bus Wake-up Capability: No
• Additional Features: NRM, NEN
• Wake-up Inputs: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8.2
The RxD output pin is designed as a push-pull output stage (see
signal the TLE8250G switches the RxD output to GND. Vice versa to produce a logical “High” signal the
TLE8250G switches the RxD output to
The level
therefore on the RxD output current
the RxD output pin.
Similar to the logical “High” signal, the level
input current
Currents flowing into the device are marked positive inside the data sheet and currents flowing out of the device
TLE8250G are marked negative inside the data sheet (see
Figure 11
The diagram in
temperature
and 4.7 mA for a temperature of +150 °C. The dependency of the output current on the temperature is almost
linear. The upper curve “
maximum value of the RxD output current of the TLE8250G.
The lower curve “
of the RxD output current of the TLE8250G. All simulations are based on a power supply
1) Characteristics generated by simulation and specified by design. Production test criteria is described in
Data Sheet
Pos.: 7.1.8
V
RxD,H
Output Characteristics of the RxD Pin
RxD Output driver capability for a logical “High” signal
T
I
RD,L
J
. At a logical “High” signal
Figure 11
for a logical “High” signal on the RxD output depends on the load on the RxD output pin and
. For a load against the power supply
V
RxD,H
= 4.6 V; typical output current - 6 sigma;
shows the output current capability of the RxD output pin depended on the chip
V
RxD,H
= 4.6 V; typical output current + 6 sigma;
I
RD,H
V
CC
. For a load against the GND potential, the current
V
.
V
RxD,H
RxD,L
= 4.6 V, the typical output current is between 5.7 mA for -40 °C
for a logical “Low” signal on the RxD output pin depends on the
19
V
CC
Table
the current
V
Figure
6).
CC
=5 V” reflects the expected minimum value
I
1)
RD,L
1), meaning to produce a logical “Low”
is flowing into the RxD output pin.
V
CC
=5 V” reflects the expected
Application Information
V
CC
Rev. 1.0, 2010-06-02
I
RD,H
= 5.0 V.
Table
is flowing out of
TLE8250G
6;