S9S08DN32F1MLH Freescale Semiconductor, S9S08DN32F1MLH Datasheet - Page 61

• Manufacturer Part Number: S9S08DN32F1MLH
• Description: IC MCU 8BIT 32KB FLASH 64LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of S9S08DN32F1MLH

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Processor Series: S08D
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 1.5 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08DZ60
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.5.11.5
Freescale Semiconductor
Reset
FPVIOL
0x18–0x00
FCBEF
FCCF
Field
0x1B
0x1A
0x19
7
6
5
FPS
W
R
FCBEF
Command Buffer Empty Flag — The FCBEF bit is used to launch commands. It also indicates that the
command buffer is empty so that a new command sequence can be executed when performing burst
programming. The FCBEF bit is cleared by writing a 1 to it or when a burst program command is transferred to
the array for programming. Only burst program commands can be buffered.
0 Command buffer is full (not ready for additional commands).
1 A new burst program command can be written to the command buffer.
Command Complete Flag — FCCF is set automatically when the command buffer is empty and no command
is being processed. FCCF is cleared automatically when a new command is started (by writing 1 to FCBEF to
register a command). Writing to FCCF has no meaning or effect.
0 Command in progress
1 All commands complete
Protection Violation Flag — FPVIOL is set automatically when a command that attempts to erase or program
a location in a protected block is launched (the erroneous command is ignored). FPVIOL is cleared by writing a
1 to FPVIOL.
0 No protection violation.
1 An attempt was made to erase or program a protected location.
Flash and EEPROM Status Register (FSTAT)
1
7
Address Area Protected
= Unimplemented or Reserved
0x1C00–0xFFFF
0x2800–0xFFFF
0x2200–0xFFFF
0x0000–0xFFFF
FCCF
Figure 4-9. Flash and EEPROM Status Register (FSTAT)
1
6
Table 4-13. Flash Block Protection (continued)
Table 4-14. FSTAT Register Field Descriptions
FPVIOL
MC9S08DN60 Series Data Sheet, Rev 3
0
5
Memory Size Protected (bytes)
FACCERR
0
4
Description
55.5K
54K
57K
64K
3
0
0
FBLANK
0
2
Number of Sectors Protected
0
0
1
72
74
76
86
Chapter 4 Memory
0
0
0
61