F9469PC 3M, F9469PC Datasheet - Page 4

• Manufacturer Part Number: F9469PC
• Description: TRANSFER TAPE 9469PC 8.5"X8.5"
• Manufacturer: 3M
• Series: VHB™r

Specifications of F9469PC

• Tape Type: Adhesive Transfer Tape
• Adhesive: Acrylic, 100MP
• Backing, Carrier: Polycoated Kraft Liner
• Thickness: 0.0090" (9.0 mils, 0.229mm)
• Thickness - Adhesive: 0.0050" (5.0 mils, 0.127mm)
• Thickness - Backing, Carrier, Liner: 0.0040" (4.0 mils, 0.102mm)
• Width: 8.50" (215.90mm) 8 1/2"
• Length: 8.50" (215.90mm) 8 1/2"
• Color: Clear
• Usage: Attachment, High Temperature Applications
• Temperature Range: 300°F (149°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 3M6446; 70006432028; F9469PCDL

Applications
3M and VHB are trademarks of the 3M Company.
Values presented have been determined by standard test methods and are average values not to be used for specification purposes.
Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your
own tests to determine their suitability for your applications.
This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our
recommendations.
Tapes & Adhesives
3M United Kingdom PLC
3M House,
28 Great Jackson Street,
Manchester,
M15 4PA
VHB Joining Systems are
suited for use in many
interior and exterior
industrial applications. In
many situations, they can
replace rivets, spot welds,
liquid adhesives, and other
permanent fasteners. Each
product in the VHB family
has specific strengths.
These can include high
tensile, shear and peel
adhesion and resistance to
solvents, moisture and
plasticiser migration. All
VHB tapes should be
thoroughly evaluated by the
user under actual u se
conditions with intended
substrates, especially if
expected use involved
extreme environmental
conditions.
Product Information :
Tel [phone]
Fax [phone]
VHB Joining Systems are
suitable for bonding a
variety of substrates,
including sealed wood,
many plastics, composites
and metals. Plastics which
can be a problem are
polyethylene, polypropylene,
PTFE, silicones and other
low surface energy
materials.
Plasticised vinyl bonding is
dependent upon the types
and concentrations of
plasticisers which can
migrate into the adhesives
causing a reduction in bond
strength; 4945 is most
resistant to plasticiser
migration. (see VHB
Special Feature products
data sheet).
3M Ireland
3M House, Adelphi Centre,
Upper Georges Street,
Dun Laoghaire,Co. Dublin,
Ireland
3M United Kingdom PLC 1996
Date : November 2001
9469PC 'VHB' Transfer Tape
Galvanised surfaces are
potential problems and
should be carefully
evaluated.
To prevent corrosion on
copper and brass, only
lacquer coated material
should be used with VHB
Joining Systems.
Thorough evaluations are
recommended when
bonding is required to any
questionable surface.
Customer Service :
Tel [phone]
Fax [phone]
4