RTV5818-300ML MG Chemicals, RTV5818-300ML Datasheet - Page 4

• Manufacturer Part Number: RTV5818-300ML
• Description: ADHESIVE SEALANT SIL FAST CURE
• Manufacturer: MG Chemicals
• Series: RTVr
• Type: Potting Compound, 1 Partr

Specifications of RTV5818-300ML

• Features: Marine Application
• Product: Silicones
• Size: 10 oz
• Application: Use in assembly applications requiring high productivity, also good for marine applications
• Chemical Component: Silicone
• Color: Translucent
• Dielectric Strength: 16.8 KV⁄mm
• Dispensing Method: Cartridge
• Elongation: 435%
• Hardness: 24 (Shore A)
• Primary Type: Adhesive
• Special Features: High Strength, Non-Corrosive
• Specific Gravity: 1.04
• Standards: UL Recognized
• Temperature Range: -60 to +205 °C
• Temperature, Rating: -60 to +204 °C
• Tensile Strength: 1.86 MPa
• Thermal Conductivity: 0.06 W⁄m.°K
• Time, Cure: 12 hr
• Time, Setting: 15 min.
• Viscosity: 360 g⁄Minute
• Volume Resistivity: 2 x 10^15 Ohm.cm
• Weight: 10 Oz.
• Main Industry: Electronics
• For Use With/related Products: Non Corrosive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS
RESPIRATORY PROTECTION
PROTECTIVE GLOVES
EYE AND FACE PROTECTION
OTHER PROTECTIVE EQUIPMENT
Exposure Guidelines
Octamethylcyclotetras
iloxane
Absence of values indicates none found
PEL - OSHA Permissible Exposure Limit; TLV - ACGIH Threshold Limit Value; TWA - Time Weighted Average
OSHA revoked the Final Rule Limits of January 19, 1989 in response to the 11th Circuit Court of Appeals decision (AFL-CIO v. OSHA)
effective June 30, 1993. See 29 CFR 1910.1000 (58 FR 35338).
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT - C & F:
VAPOR PRESSURE (20 C) (MM HG):
VAPOR DENSITY (AIR=1):
FREEZING POINT:
MELTING POINT:
PHYSICAL STATE:
ODOR:
COLOR:
RTV5818 12C-Crtrg (0.738LBS-0.335KG)
Silicone Rubber Sealant
Component
Store away from heat, sources of ignition, and incompatibles. Keep container closed.
Eyewash stations; Showers; Exhaust ventilation
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
Cloth gloves.
Safety glasses
Wear suitable protective clothing and eye/face protection.
556-67-2
CAS RN
Z_INTL_OEL, REL
Page 4/8
Source
Not applicable
< 0.75
No data available
Not applicable
Not applicable
Solid
SLIGHT AMMONIA
Translucent
Material Safety Data Sheet
5 ppm
Value
Version: 1.5
03/28/2008