D2SW-P2L3M Omron, D2SW-P2L3M Datasheet - Page 2

• Manufacturer Part Number: D2SW-P2L3M
• Description: SWITCH SIM ROLLER SPDT 2A WIRE
• Manufacturer: Omron
• Series: D2SW-Pr
• Type: Basic/Snap Actionr

Specifications of D2SW-P2L3M

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 2A @ 250VAC
• Actuator Type: Lever, Simulated Roller
• Mounting Type: Chassis Mount
• Termination Style: Wire Leads
• Operating Force: 61gf
• Microswitch Type: Subminiature
• Actuator Style: Simulated Roller Lever
• Operating Force Max: 0.6N
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 2A
• Actuator: Simulated Roller Lever
• Contact Form: SPDT
• Ip Rating: IP 67
• Current Rating (max): 2 Amps
• Voltage Rating Ac: 250 Volts
• Voltage Rating Dc: 30 Volts
• Contact Rating: 2 Amps at 50 Volts
• Ingress Protection: IP67, Watertight
• Mounting: PCB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2SWP2L3M; SW812; Z2130; Z2130

Specifications
■ Characteristics
Note: 1. The data given above are initial values.
■ Ratings
Note: The ratings values apply under the following test conditions.
■ Approved Standards
Consult your OMRON sales representative for specific models with
standard approvals.
UL Recognized
CSA Certified
202
Item
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Degree of protection
Degree of protection against electric shock Class I
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Life expectancy
Weight
Model
D2SW-P2
D2SW-P01
Rated voltage
125 VAC
250 VAC
30 VDC
2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate.
3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 20 operations/min.
apply at the total travel position. Contact opening or closing time is within 1ms.
Sealed Subminiature Basic Switch
Rated voltage
30 VDC
250 VAC
30 VDC
125 VAC
D2SW-P2
—
2 A
2 A
D2SW-P01
0.1 A
—
0.1 A
Model
D2SW-P2
0.1 mm to 500 mm/s (pin plunger models)
Mechanical: 120 operations/min max.
Electrical:
100 MΩ min. (at 500 VDC)
Terminal models: 50 mΩ max.
Molded lead wire models: 100 mΩ max.
1,000 VAC, 50/60 Hz for 1 min. between
terminals of the same polarities
1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
IEC IP67 (excluding the terminals on terminal models)
175
-20°C to 70°C (at 60% RH max.) with no icing
85% max. (for 5°C to 35°C)
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 50,000 operations min.
(20 operations/min.)
Approx. 2 g (pin plunger models with terminals)
Resistive load
2 A
0.1 A
D2SW-P
20 operations/min max.
2
(approx. 30 G) max.
2
(approx. 100 G) max.
■ Contact Specifications
Note: Minimum applicable loads are indicated by N standard refer-
■ Contact Form
Note: Lead wire colors are indicated in parentheses.
Item
Specification
Material
Gap (standard value)
Minimum applicable load
(see note)
SPDT
(Black) (Blue) (Red)
COM
ence values. This value represents the failure rate at a 60%
(λ
The equation
rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
60
) reliability level (JIS C5003).
NO NC
λ
D2SW-P01
Terminal models: 100 mΩ max.
Molded lead wire models: 150 mΩ max.
600 VAC, 50/60 Hz for 1 min. between
terminals of the same polarities
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 200,000 operations min.
(20 operations/min.)
60
SPST-NC
(wire models, only)
=0.5 x 10
(Black)
COM
D2SW-P2
Rivet
Silver alloy
0.5 mm
160 mA at 5 VDC 1 mA at 5 VDC
-6
/ operations indicates that a failure
(Red)
NC
SPST-NO
(wire models, only)
D2SW-P01
Crossbar
Gold alloy
(Black) (Blue)
COM
NO