6000-410023 Storm Interface, 6000-410023 Datasheet - Page 11

• Manufacturer Part Number: 6000-410023
• Description: KEYPAD ILLUM MATRIX OUT 6000 SER
• Manufacturer: Storm Interface
• Series: 6000r

Specifications of 6000-410023

• Switch Type: Conductive Rubber
• Number Of Keys: 16
• Matrix (columns X Rows): 4 x 4
• Output Type: Matrix
• Key Type: Polymer
• Legend: Calculator Format
• Interchangeable Legends: No
• Illumination: Illuminated
• Seal Rating: IP65
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 6000-410021; 6000-410022; 6000-410023; MGR1622

Section 5. Installation
The 6000 Series keypad is designed to be secured with 6 panel mount clips and locknuts. The gasket is to be
positioned between keypad and fixing panel prior to installation. Ensure that a suitable panel material is used to
support the keypad. This must provide sufficient rigidity where sealing is required. (e.g. 1.6mm to 2.0mm steel).
To optimise sealing the under side of the panel should be flat, clean & free of debris .
1) ) Prepare a panel with 2mm weld studs and the appropriate cutout (see below)
2) Fit the sealing gasket over the weld studs.
3) Offer up the keypad to the rear of the panel, and fit a mounting clip over each stud. Secure in place with locknuts. The
torque applied to the locknuts should not exceed 25cN.m
This document is provided for use and guidance of engineering personnel engaged in the installation or application of STORM data entry products manufactured by Keymat Technology Ltd.
Please be advised that all information, data, and illustrations contained within this document remain the exclusive property of Keymat Technology Ltd. and are provided for the express and
exclusive use as described above. This document is not supported by Keymat Technology’s engineering change note, revision or reissue system. Data contained within this document is subject
to periodic revision, reissue or withdrawal. Whilst every effort is made to ensure the information, data and illustrations are correct at the time of publication, Keymat Technology Ltd. are not
responsible for any errors or omissions contained within this document.
Pod Base
Gasket
Rear of Panel
Panel Mount Clip
6000 Series Application/Engineering Manual Version 1.01 Feb 2004 Page 11 of 16
Application / Engineering Manual
6000 Series keypad for public environments
Pod Lid
Pod Lid / Base Snap Fit
M3 Weld Stud on
Rear of Panel