A16-5 Omron, A16-5 Datasheet - Page 14

• Manufacturer Part Number: A16-5
• Description: LAMP INCAND 6VAC/DC 16 SERIES
• Manufacturer: Omron
• Type: Incandescent Lamp, 6 Volts AC/DCr
• Series: A16r

Specifications of A16-5

• Supply Voltage: 5V
• Base Type: Bi-Pin
• Average Bulb Life: 3000h
• Svhc: No SVHC (15-Dec-2010)
• Current Rating: 60mA
• Nom Operating Voltage: 5V
• Operating Lifetime: 3000h
• Voltage Rating: 5V
• Voltage Rating Vac: 5V
• Illumination: Illuminated
• Contact Rating: 60 mAmps at 6 Volts AC/DC
• Height: 13 mm
• Mounting Style: Snap In
• Termination Style: Tabs
• Lamp Base Type: Bi-Pin
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A16 Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

A16
Note: Lock stroke is only for alternate operation.
Operation
Wiring for Screw-Less Clamps
Mounting Wires
Features
Operating force (OF) max.
Releasing force (RF) min.
Total travel (TT)
Pretravel (PT) max.
Lock stroke (LTA) min.
(See note.)
Operating Characteristics
Terminal Arrangement
1. Strip a length of 10 mm off the end of the wire (allowable
2. Bunch wire strands together and straighten them.
3. Insert the wire into the insertion hole while pressing the
Mounting Precautions
1. The mounting panel thickness must be 0.5 to 3.2 mm.
2. The mounting ring must be tightened to a torque 0.29 to 0.49 N m.
3. The mounting hole must be cut out in the way described previously. The dimension A is the length required for removing the Switch when
4. Be sure to mount the Case to the Switch with the correct orientation. Mount with the mark on the Case facing in the same direction as the
5. When using stranded wires with the Screw-Less Clamp, wrap the ends of the wires together first.
6. When wiring, insert the wires until they come into contact with something. After wiring, pull on the wires to check that they are secure.
7. After wiring, ensure that continuous pressure is not applied to the terminals.
8. Be sure to perform wiring correctly. Refer to internal connections diagrams and check the terminal numbers before wiring.
The voltage-reduction circuit is built in.
range: 10 1 mm).
release button at the side of the hole. (Using a precision
screwdriver is recommended.)
it is in the mounted state. If Switches are mounted side-by-side separated by less than the specified distance, it may not be possible to
remove the Switch.
side of the Switch with the direction arrow or the word TOP.
Case
Side with direction arrow
DPDT lighted models
(Bottom view)
mark
Type
Switch
2.45 N
0.29 N
Approx. 3 mm
2.5 mm
0.5 mm
Direction arrow
SPDT
IP40
4.41 N
Screw-Less Clamps and Voltage Reduction Unit
Removing Wires
Remove wires by pulling them while pressing the release button.
Note: When reusing wires that have already been locked, cut off
White
Black
Black
Red
4. Let go of the release button to lock the wire into place.
5. After locking, pull on the wire gently to confirm that it is
DPDT
Voltage-reduction lighting models with Screw-Less Clamps
(A16L-jT1-2S, A16L-jT2-2S) incorporate voltage-reduction
circuits.
securely locked.
Pushbutton Switch
the end of the wire and strip the wire again before using.
Case
2.94 N
Black
DPDT lighted models
Red
mark
SPDT
White
Red
Black
Black
Oil-resistant IP65
Side indicating TOP
(Bottom view)
Switch
TOP mark
4.91 N
DPDT
A16
65