MF1PLUS8011DA4/02 NXP Semiconductors, MF1PLUS8011DA4/02 Datasheet - Page 10

• Manufacturer Part Number: MF1PLUS8011DA4/02
• Description: IC SMART CARD 4KB EEPROM MOA4
• Manufacturer: NXP Semiconductors
• Series: MIFARE PLUS™r

Specifications of MF1PLUS8011DA4/02

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443A / Mifare
• Package / Case: PLLMC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
MF1PLUSX0Y1_SDS_31
Product short data sheet
PUBLIC
8.5 Security level 1
8.6 Security level 2
8.7 Security level 3
Security level switching is performed using the Commit Perso command:
Using the originality function, it is possible to verify that the chip is a genuine
NXP Semiconductors MIFARE Plus.
Security level 1 offers the same functionality as a MIFARE Classic 1K and MIFARE
Classic 4K using the backwards compatibility protocol. The MIFARE Classic 1K and
MIFARE Classic 4K products are specified in
Furthermore, an optional AES authentication is available in this level without affecting the
MIFARE Classic 1K and MIFARE Classic 4K functionality. The authenticity of the card can
be proven using strong cryptographic means with this additional functionality.
The timings may differ from the MIFARE Classic 1K and MIFARE Classic 4K products.
Using the originality function, it is possible to verify that the chip is a genuine
NXP Semiconductors MIFARE Plus.
Security level 2 also offers the functionality of a MIFARE Classic 1K and MIFARE
Classic 4K using the backwards compatibility protocol. The significant difference
compared to security level 1 is that an AES authentication is mandatory and that the
CRYPTO1 keys are derived for each session using the results from the AES
authentication, rather than being constant for a specific sector.
The timings may differ from the MIFARE Classic 1K and MIFARE Classic 4K products.
In security level 2, the following keys are assigned to each sector:
The access conditions are set in the sector trailer as in MIFARE Classic 1K and MIFARE
Classic 4K.
Using the originality function, it is possible to verify that the chip is a genuine
NXP Semiconductors MIFARE Plus.
The operation in security level 3 is solely based on the ISO/IEC 14443-4 protocol layer.
The usage of the backwards compatibility protocol is not possible.
In security level 3, a mandatory AES authentication between PICC and reader is
conducted, where two keys are generated as a function of the random numbers from the
PICC and the reader as well as of the shared key.
•
•
•
•
•
Card Configuration Key
Card Master Key
Level 2 Switch Key (for L1 card)
Level 3 Switch Key (for L1 card)
Two AES keys (key A and key B) these keys are also used in security level 3
two CRYPTO1 keys (key A and key B) these keys are also used in security level 1
All information provided in this document is subject to legal disclaimers.
Rev. 3.1 — 19 April 2010
163531
Ref. 1
Mainstream contactless smart card IC
and
Ref.
MF1PLUSx0y1
2.
© NXP B.V. 2010. All rights reserved.
10 of 20