GS-BT2416C2.AT1 STMicroelectronics, GS-BT2416C2.AT1 Datasheet - Page 23

• Manufacturer Part Number: GS-BT2416C2.AT1
• Description: BLUETOOTH CLASS 2 MODULE SPP
• Manufacturer: STMicroelectronics

Specifications of GS-BT2416C2.AT1

• Frequency: 2.4GHz
• Data Rate - Maximum: 721kbps
• Modulation Or Protocol: Bluetooth v1.2, Class 2
• Power - Output: 0dBm
• Sensitivity: -74dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 50mA
• Current - Transmitting: 90mA
• Data Interface: PCB, Surface Mount
• Memory Size: 4Mb Flash, 64kBytes RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: SPI, I2C, UART, PCM
• Data Rate: 721 Kbps
• Modulation: USB, UART, PCM
• For Use With: 497-6224 - DEMO BOARD FOR GS-BT2416C2.ATI497-6223 - DEMO BOARD FOR GS-BT2416C2.H497-5792 - BOARD DEMO FOR CLASS 1 MODULES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5791

GS-BT2416C2.AT1
A.20
A.21
A.22
AT+BTMACROSTART
Set the device in a programmable way. Every AT command coming after, with own
parameters, will not be executed but will be stored in the very insertion order.
This command will be available only if the device is set to COMMAND MODE.
To notice that starting a macro storing sequence will erase any previous present sequence.
AT+BTMACROSTOP
Stop the programmable status and store the commands sequence inserted so far into the
flash memory of the module. If the sequence is larger then memory block available an error
will be raised. The command will be available only if a device is set to COMMAND MODE
and only if it come after an AT+BTMACROSTART command.
Due to internal time needed to write a flash memory area a little
time delay is possible before any return value.
AT+BTMACROCLEAR
Erase any possible commands sequence present into the flash memory. This operation is
non-reversible.
Syntax: AT+BTMACROSTART
Return value: <OK, ERROR>
Syntax: AT+BTMACROSTOP
Return value: <OK, ERROR>
Syntax: AT+BTMACROCLEAR
Return value: <OK, ERROR>
AT command
23/32